Darkroom Portraits (Part 2)

Luis-F-S · Sep 1, 2016

adelorenzo said:
Extreme Makeover: Darkroom Edition

I recently completed a major darkroom reno and I couldn't be happier! I tried to take pics throughout so I could share them here. Sorry in advance for the long post but I figured it would be better to add rather than to start a new thread.

Great use of the space! Vast improvement over your previous darkroom. Love the sink over the washer/dryer!

ciennepi · Oct 4, 2016

I have find the time to descibe my temporary darkroom. I set up in my bathroom (we have two so the wife don't grumble) and can stay installed all the day long.
The window is covered with lightproof cloth, the enlarger (a wery old but in like new condition Durst U70) is set on a rolled cabinet with a rotating shelf on the right on wich there are the first and second fixer tray.
The developer and stop tray are in the bathtub. Inside the cabinet I have tray, paper and other darkroom accessories.
On the cabinet top you can see my Scoponet grain focuser and my Beseler Analite 400 darkroom meter.
To set up the darkroom it took me about 15 minutes and about 30 minutes to dismantle all (there are all the tray to empty and clean)
Here I can print the negative from 35mm to 6x6 or 6x7 (Nikon Fe, Hasselblad 500CM and Mamiya RB67 ProS) up to 40x50 cm print dimension.
I hope that when I will buy a new home I can build a permanent one for a very bigger enlarger that I purchased a few mounth ago (a Durst Laborator 138S) but for now this is my sweet refuge.

jhonmaria45 · Oct 12, 2016

Bob Carnie said:
Looks great... can't agree more about the music .

hi! I need some advice for a total darkroom

ratmandu · Nov 15, 2016

Just finally got my own darkroom set up. It's in a weird attic space that has no windows. Has no running water either, but I'm making do so far.
Found these awesome dispenser bottles at walmart for <$5 each which are great for storing chems between sessions and make it easy to dispense out into my trays.

On the other side of the room, I have some wire shelving up on the wall to put prints on to dry.
The bulb over there will fog paper if it's close, but after 15 minutes with it on and paper out where the trays sit, I get nothing (quarter test). It's at least helpful so I don't trip over the box above the stairs (bottom left) while I transport prints to dry.

Neal · Nov 20, 2016

Dear ratmandu,

A really nice space. Much nicer than I have ever had (although my water access has been better). Only one question. What are you saving that CRT for? ;-)

Neal Wydra

frank · Nov 20, 2016

xvelids said:
Wow, great space, sink, and enlarger!

I notice fluorescent lighting overhead. Is here an fluorescent glow after the lights are off?
(I had this problem with a fluorescent replacement of an incandescent bulb that I tried.)

ratmandu · Nov 26, 2016

Neal said:
Dear ratmandu,

A really nice space. Much nicer than I have ever had (although my water access has been better). Only one question. What are you saving that CRT for? ;-)

Neal Wydra

Hah, not really saving it for anything, just too lazy to drag it down the stairs at this point.

peterwith · Dec 1, 2016

Wao, you guys are amazing, we maybe have no idea of Dark Room in Vietnam. It's maybe because of the structure of the house or you guys did it for some reasons. But it's amazing.

Martyn L · Feb 5, 2017

Oops try this guys https://spark.adobe.com/page/BczutY16dOwbt/

choiliefan · Feb 5, 2017

You really should post you pics here or to a readily viewable site. I have absolutely no desire to sign up to another site I'll never visit again... cookies and all.

Martyn L · Feb 5, 2017

choiliefan said:
You really should post you pics here or to a readily viewable site. I have absolutely no desire to sign up to another site I'll never visit again... cookies and all.

UHHH its not a website
its a spark page I created of my darkroom build no need to sign up ?

choiliefan · Feb 5, 2017

I have neither FB or Google accounts. I may be missing something obvious though. Forest for the trees thing.

Molli · Feb 5, 2017

Martyn L said:
This is my darkroom set up
https://spark.adobe.com/#design/page/ad20a9f2-6883-446e-9dcb-82cb9067655b

Hi Martyn,
Welcome to APUG! I'm afraid I, too, got redirected to a log in page. Perhaps if you sign out of Spark and get the link to your images from "outside" the site? Hmm, sorry, poorly explained, but I hope you can figure out what I mean. I've never used Spark before so I don't know my way around, I just know that some pages have different web addresses if you're signed in than when you're not.
Here's the page I got and which choiliefan probably got also.

If you're having trouble uploading images directly to this thread, I'd be happy to give you access to my Photobucket account? The only action it's seen in the past decade has been when I've "loaned it out" to another APUGger to use here, so don't hesitate to yell if you'd like to use it.

Martyn L · Feb 5, 2017

Sorry guys .....now I can see the problem.
I have fixed the link on the previous post so it should be right there and here. https://spark.adobe.com/page/BczutY16dOwbt/

I should have checked before I posted ....once again apologies.

MattKing · Feb 5, 2017

What a nice darkroom, and a great presentation as well!

JPJackson · Feb 6, 2017

MattKing said:
What a nice darkroom, and a great presentation as well!

+1
Beautiful work space!

pbromaghin · Feb 6, 2017

My gawd. Incredible attention to detail in your design, layout, and equipment. Fantastic work.

choiliefan · Feb 7, 2017

Beautiful! Thanks for sharing.

Ai Print · Feb 7, 2017

Very nice build Martyn L!!

I'm super excited to start my build, closed on the house about three weeks ago, just finished the interior painting, walls, ceiling, floor and enlarger cove.

It's a bit over 450 square feet of usable space, ceilings are 8' foot 7" and the enlarger cove is about 14' feet wide so it will have an LPL4550 XLG on the left and right side, right side will be wall mounted with custom drop table and in the center will be an easily stowed wall mounted / horizontally oriented geared 4x5 camera converted to a mural enlarger. I have 15 feet of stainless steel sinks going in the wet side along a 33' foot wall but it will all be knit together to form about 22' feet of wet workflow area for a specially designed mural paper processing system. I am adding grey-blue vinyl baseboard this weekend, painting the can light trims "Jobo Red", might stencil sprocket holes along the edge of the grey paint for a fun effect.

Lots of things to do, plumbing re-route, drain, silver recovery, ventilation....

It's taken 12 years this month to get here, but finally, this next chapter of my career gets to be fully realized.

Bob Carnie · Feb 7, 2017

Early Riser said:
I just completed construction of a new darkroom. These photos only show the wet room, the dry room that stores prints and negatives and is set up for mounting and matting is not completed yet.

really nice space

grahamp · Feb 7, 2017

[Ai Print] 450 sq. ft.? That's over a third of the size of our house And you don't want to know what that size apartment goes for in San Francisco.

It's a really nice space. You are going to have fun.

Ai Print · Feb 7, 2017

grahamp said:
[Ai Print] 450 sq. ft.? That's over a third of the size of our house And you don't want to know what that size apartment goes for in San Francisco.

It's a really nice space. You are going to have fun.

We tried to stay in Aspen proper where I have lived for nearly 19 years but at $1,000-$3,000 a square foot there was just no way I was going to have a real workspace. So we are about 15 miles away, total footage on the house is 3,750....way bigger than I could have imagined ever having.

It's indeed exciting!

Martyn L · Feb 7, 2017

Wow !!! now thats space.
Mine is literally a garden shed by comparison. Gonna cost mega bucks to kit out though.

Ai Print · Feb 7, 2017

Martyn L said:
Gonna cost mega bucks to kit out though.

Nah, I already have all the goods, including a Jobo CPP3, 2x LPL4550XLG / VCCE, sinks, all RH Designs electronics, 2x Hass D250, etc.

I have been literally building up to this for at least 10 years, its plug and play at this point.

Martyn L · Feb 8, 2017

Ai Print said:
Nah, I already have all the goods, including a Jobo CPP3, 2x LPL4550XLG / VCCE, sinks, all RH Designs electronics, 2x Hass D250, etc.

I have been literally building up to this for at least 10 years, its plug and play at this point.

Took 6 years to get mine together.....I have the lpl7452 and a 7700 i use for 6x45 format.

Darkroom Portraits (Part 2)

Moderator

Privacy & Transparency

Privacy & Transparency