what was the last camera you used, last film and how was it developed

[AnselMortensen]

Eastman 2D 8x10, Fuji NPS, Foma 100.

Hassy 500 C/M, Phoenix, Shanghai 220, Cinestill BWXX, Ektar 100

C-41 will be lab processed.
B/W will be home processed in Rodinal.

 

[mshchem]

I was out walking this afternoon, beautiful day, had my Nikon F2 Titan, loaded with FP4+ , some little kid across the street kept saying "hey mister, what are you doin'?" I told her I was taking pictures. I don't think either of them had ever seen a camera.

 

[chuckroast]

Leica IIIf with new to me 35mm f/2.5 Voigtlander Color-Skopar. Fomapan 200 EMA developed in Pyrocat-HD 6:3:500 for 28 min.

 

[lobitar]

Yesterday - Super Graphic w. Optar 4.7/135mm and Goerz-Berlin Dagor 6.8/150 of WW1 vintage. Ektachrome E100 in Toyo 6x9 RH. To be developed in commercial lab. Most Optar shots focused with built-in rangefinder, the Dagor with groundglass.

 

[murdockhendrix]

Leonardo 1.5 inch (38mm f/150) pinhole camera, 4x5 Ilford HP5 Plus 400, shot @ 400, Cokin Series A Yellow filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 10:27m at 20° C, JOBO 2521 MultiTank2 tank, 3 min pre-wash, economy vol. 400ml, increased development time by +10% per B's guide.





Native Heart Bridge by Richard Hendrix, on Flickr

 

[mshchem]

Fujica G617, Fujichrome Provia F and Velvia 100. Developed with Jobo CPP3 in Fuji chemistry. I will scan at some point. Came out pretty!

 

[Ernst-Jan]

Fujica G617,

I envy you

Last pictures I took were with a Canon A-1 with FDn 50 f/1.2 in bulk-rolled HP5+, the film isn't finished yet but I'll develop it with Ilfosol 3 1+14 11:00 minutes.

If only finished rolls count: Fujifilm Pro 160NS in my Mamiya M645 1000S

 

[mshchem]

On my light table

 

[MattKing]

Zeiss Ikonta 521-2, TMY-2, replenished XTol.
For the Monthly Shooting Assignment this month - "Please Be Seated":

Memorial Bench - October 2024

• MattKing
• Oct 30, 2024
• 1

A newly installed memorial bench facing toward one of my favorite sites in the North 40 Lands...

 

[Sanug]

I developed 2 rolls Fomapan 100. I tested a freshly serviced Zeiss Jena Flektogon 4/50mm with my Kiev 60. Good results, the big and heavy camera produces no visible mirror slap blurring even at 1/60s handheld. The films were exposed ISO 50 and developed with Adox XT-3, 1+3, 14 Min.

 

[mshchem]

I developed 2 rolls Fomapan 100. I tested a freshly serviced Zeiss Jena Flektogon 4/50mm with my Kiev 60. Good results, the big and heavy camera produces no visible mirror slap blurring even at 1/60s handheld. The films were exposed ISO 50 and developed with Adox XT-3, 1+3, 14 Min.

Nice glass! Nice outfit!

 

[Chuck_P]

4x5 Canham DLC, TMX @EI50, Xtol 1+0, using a SP445 tank.

 

[darkosaric]

Leica M3 this time with 50mm Summitar, nor Summicron as usual.
Fomapan 400 in HC 110, not Rodinal as usual.

Developing prints on Fomatone MG paper - expired, but still good.

 

[Disconnekt]

For 620 film (well, rerolled 120 film onto 620 spools) in my Kodak Monitor 620:
2 rolls of Kodak Tmax 400 & 2 rolls of Bergger 400, with one roll pushed 2 stops

For 35mm film in my Pentax MZ-S:
A roll of Bergger Pancro 400 & a roll of Kodak Tri-x 400 pushed 2 stops


Going to be sending em out to a lab to get developed in a few days.

 

[murdockhendrix]

Kodak Retina IIIC, 50mm Xenon Schneider-Kreuznach, Kodak F II/32 Yellow Medium filter, Kentmere Pan 100, developed at home using B's Processor, PC-512 Borax developer, 1:50, 6:40m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.

 

[Mr Flibble]

KW Praktica FX 2, CZJ 50mm f/2.8 Tessar, Adox 50 HR
Bellini Euro-HC, dilution E, 6 minutes @ 20C. Pre-washed, 30 seconds initial agitation, 1 inversion every minute.

 

[Sanug]

Canon 7s, Jupiter-9 2/85, Bergger Pancro 400.
Adox XT-3 stock, 10 min. Quite grainy film.

 

[Sanug]

I developed 2 rolls Fomapan 100. I tested a freshly serviced Zeiss Jena Flektogon 4/50mm with my Kiev 60. Good results, the big and heavy camera produces no visible mirror slap blurring even at 1/60s handheld. The films were exposed ISO 50 and developed with Adox XT-3, 1+3, 14 Min.

Some images:

 

[murdockhendrix]

Zero Image 75D pinhole camera, 4x5 Ilford HP5 Plus 400, shot @ 400, Cokin Series P Orange #002 filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 10:27m at 20° C, JOBO 2521 MultiTank2 tank, 3 min pre-wash, economy vol. 400ml, increased development time by +10% per B's guide.

 

[lobitar]

Old ArcaSwiss adapted with Sinar shutter and Sinar 4x5 back at the Copenhagen harbour. Ektachrome E100 in Horsemann 6x12 RH. ApoSkopar 30 cm. Roll not yet finished, but to be commercially developed.

 

[Paul Howell]

Minolta 800 Si, 50mm, 28mm and 100 2.8, Kentmere at 800 and Fomapan 400 at 500, developed in Diafine 2 bath, have not yet printed.

 

[GregY]

A couple from a trip to Austin a few weeks ago. One from a newly acquired Nikon F and a bought-in-Austin 50mm (TMax400) & the second from a Leica CL with a just serviced Canon LTM 28mm (Tri-X). Developed in Pyrocat HD. 11x14" prints on Ilford Classic FB in LPD.

 

[AnselMortensen]

4x5 Anniversary Speed Graphic, Wollensak 10" f4.5 Raptar Telephoto
Svema 100, Rodinal 1+50.

 

[Vaughn]

FP4+, 11x14, Iflord PQ Universal Developer in trays. Might have something.

 

[Mr Flibble]

Shot a roll of Fomapan 200 Creative with a Zeiss Super Ikonta 532/16
Exposed at E.I.130, developed as 200 in Bellini Euro-HC, dilution E, 5.5minutes at 20C , as noted on the Massive Dev Chart.
Negatives came out thin. Salvageable with a bit of Photoshop, but I'm not particularly happy with the results.

It definitely needs more time in the soup, maybe a bit more agitation.