what was the last camera you used, last film and how was it developed

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Kentmere Pan 400, shot at ISO 200, developed at home using B's Processor, Kodak HC-110, 1:79, 10:15m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per the B's guide.

 

[Paraframe]

Mamiya 645 500 with the 80mm F2.8 c lens, yellow 8 and red 25 filters, Kentmere Pan 100. hc110 1:47. (The banding is from lazy scanning, not present on the negs)

 

[Melvin J Bramley]

Minolta Autocord, HP5 in Perceptol 1:3 constant agitation.
Moved to Perceptol when ID11 vanished from the shelves.
ID11 is back but I will continue to experiment with Perceptol.
The long developing times with dilute Perceptol are somewhat reduced by constant agitiation.

 

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Catlabs X Film 320 Pro, shot at ISO 200, using a Zomei 82mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.



Two Palms by Richard Hendrix, on Flickr

 

[ChrisGalway]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Catlabs X Film 320 Pro, shot at ISO 200, using a Zomei 82mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.



Two Palms by Richard Hendrix, on Flickr

What's "B's Processor"?

 

[murdockhendrix]

@ChrisGalway It's a 3D printed film processor. I have a JOBO CPE2+ but it's a pain to set up just for B&W film. I'll use the CPE2+ when I do C41. But I really like the convenience of B's Processor. Here's the link for Bs Processor.

Here's a short video I made of it in action.

Bs Processor by Richard Hendrix, on Flickr

 

[ChrisGalway]

@ChrisGalway It's a 3D printed film processor. I have a JOBO CPE2+ but it's a pain to set up just for B&W film. I'll use the CPE2+ when I do C41. But I really like the convenience of B's Processor. Here's the link for Bs Processor.

Here's a short video I made of it in action.

Bs Processor by Richard Hendrix, on Flickr

Thanks, I learn something new every day on Photrio!

 

[murdockhendrix]

Thanks, I learn something new every day on Photrio!

You're welcome. That's what I love about Photrio.

 

[Andrew O'Neill]

TMY. RB67. FX-37.

 

[Willy T]

@ChrisGalway It's a 3D printed film processor. I have a JOBO CPE2+ but it's a pain to set up just for B&W film. I'll use the CPE2+ when I do C41. But I really like the convenience of B's Processor. Here's the link for Bs Processor.

Here's a short video I made of it in action.

Bs Processor by Richard Hendrix, on Flickr

Wow! Thanks for posting this - looks like a godsend

 

[Philippe-Georges]

A test for a little bit of a new way of working:
Fp4+ in Pyrocat-HD, Hasselblad 500C/M + Sonnar C 250mmT*, natural light F1:81/2 t1 sec.
The Sonnar works a little softer than the S-Planar 120mm which was better for the way this brons sculpture's surface was like.

 

[Dan Rainer]

Canon F1n/35mm f2.8/Godox Lux Jr flash
Ilford HP5+
XTOL 1:1 for 6:30 at 20c

Baby's first birthday

 

[murdockhendrix]

Pentax MX, Pentax 40mm f2.8 Pancake lens, Kentmere Pan 400, shot at ISO 200, using a Vivitar #08 Yellow, developed at home using B's Processor, Photographers Formulary TD-16, stock, 8:05m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.

 

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Catlabs X Film 320 Pro, shot at ISO 200, using a Zomei 82mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.



Salt Marsh at High Tide by Richard Hendrix, on Flickr

 

[lenspeeper]

@ChrisGalway It's a 3D printed film processor. I have a JOBO CPE2+ but it's a pain to set up just for B&W film. I'll use the CPE2+ when I do C41. But I really like the convenience of B's Processor. Here's the link for Bs Processor.

Here's a short video I made of it in action.

Bs Processor by Richard Hendrix, on Flickr

I bought a B's Processor after shopping the net for a few weeks. I figured for the price, I'd take a chance. It is an excellent product and the maker of it is very responsive and helpful to any questions getting it set up. Admittedly, the rubber band attachment of the rotational sensor looked a little clunky, but it works just fine. I've done several rolls using Rodinal with constant agitation and the results are consistent and excellent. He designed it with Patterson tanks in mind, but I now use the short Jobo and there is an accessory supplied that supports it.

 

[Paul Howell]

2 rolls of Aristapan E.I 200 Acufine Stock, Minolta 800 Si with 50mm 1.7 or 28 2.8

 

[AnselMortensen]

Hasselblad 500C/M, 80mm CF Planar, Ilford XP2.
Will be developed in Rodinal when I get some time.

 

[Philippe-Georges]

Hasselblad 500C/M, 80mm CF Planar, Ilford XP2.
Will be developed in Rodinal when I get some time.

Interesting, I am curious to see the results of XP2 developed in Rodinal.
I know that this B&W C-41 film can be developed in a regular B&W process, but never seen it done in Rodinal.

 

[Mr Flibble]

Leica IIIc (1942), Leitz 5cm f/2.5 Hektor (1933), Rollei Retro 80S
Bellini Euro HC, dilution E, 10min, 20C (30 sec initial agitation, 1 inversion every 30 seconds)

 

[Andrew O'Neill]

Canham 8x10 with 4x5 back. TMX 100. FX-37. XTol.

 

[Philippe-Georges]

This morning in Saint Bavo's abby, some last pictures for the upcoming book: Silvestri SLV + S-A 47mm (+ orange or red contrast filter), exposure times around 1sec, 6x9, on Hp5+ box speed, developed in Pyrocat-HD (1+1+100) 16min @ 22°C with good results (shadows!), and already stored away in pergamyne sheets.
To be wet-printed next week.

 

[Andrew O'Neill]

Canham 8x10. HP5. #25 filter. EI 64. Pyrocat-HD. BTZS tube.

 

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Kentmere Pan 100, shot at ISO 100, using a Hoya Yellow (K2) filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 10:56m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by -5% per B's guide.

 

[Mr Flibble]

Leica M3 DS, 7Artisans 50/1.1, Rollei Retro 80s
(Bellini Euro HC, E, 10min, 20C)

 

[Helios 1984]

Topcon 35-L w/ Kentmere 400
Developed in Agfa Rodinal 1+25 (12ml + 300ml) at 20c for 8 minutes. Initial agitation 30 seconds followed by 5 seconds agitation every 30 seconds (swirl)
Then I did a 10-15 seconds stop bath followed by a quick rinse and 5:30 minutes rapid fixing. I finished with a 20 minutes wash and 2 minutes in wetting agent.

Note: I was planning on developing with PMK Pyro but found out that the juice had gone south.