what was the last camera you used, last film and how was it developed

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Catlabs X Film 320 Pro, shot at ISO 200, used a Zomei 82mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by 5% per B's guide.

Salt Marsh in Infrared by Richard Hendrix, on Flickr

 

[Sanug]

Rollei 35 T with Kentmere 400@800. Adox XT-3, 1+1, 16 Min. Images of a Vernissage in Solingen/Germany. Surprisingly good and sharp. Sorry, I can show the contact sheet only.

 

[Marcelo Paniagua]

Packed my Tachihara 4x5, Fujinon 70mm f/5.6 and Aviphot 200 film @200 to do some architecture shoots on local churches. Just developed this morning with E-76. Negative turned out very good. Will scan tomorrow and if it look good enough, probably some 11x14 on my darkroom.

 

[mshchem]

Rollei 35 T with Kentmere 400@800. Adox XT-3, 1+1, 16 Min. Images of a Vernissage in Solingen/Germany. Surprisingly good and sharp. Sorry, I can show the contact sheet only.

View attachment 371336

Very nice! I love to see a contact sheet. You have nice consistent exposure. Well done!

 

[rduraoc]

HP5+ on a Fuji GX680III, shot at box speed on a portrait session for my kid's 7th birthday. Today in the darkroom I confirmed that I screwed up the development, R09 1+50@ 20° for 11 min, as the negatives are waaay too thin and very difficult to print.

 

[Ronny H]

Yashica Mat 124G, Ilford FP4 120ASA, expired in 1980 (bought at a flea market). Exposed at 30ASA and developed by a lab.

Aaaaaaand.....



Nothing.

Probably stored incorrectly for many years, the emulsion had dried on one half of the film.

 

[88E30M50]

Last camera: Canon A-1 used about 20 minutes ago
Film: Kentmere 100 pushed to 200
Development: Not developed yet, but I'll do this in replenished D-23 for about 10 or 11 minutes. That has given me pretty good results for K100 when pushed a stop.

 

[Sanug]

Canon 7s, Jupiter-12 2.8/35 mm. Wolfen (Orwo) NP100. Adox XT-3, 1+2, 12 min.

The negatives are a little bit too thin, under developed and under exposed. I should use my glasses to read the meter at my Canon 7s. And the NP100 needs slightly longer development.

Still usable results, pretty sharp and fine grain. The Jupiter-12 is soft and has blurred edges wide open, but becomes really sharp when stepped down a little bit.

 

[Arthurwg]

Hasselblad 501CW, Mamaya 7II, Holga. Nine rolls B&W, sent to NCPS.

 

[moggi1964]

Canon T90 using HP5+ at @800 13 minutes in used Ilford DDX @20c

Not my best work on developing sadly.

 

[MattKing]

Second to last was with my new to me Ikonta 521/2, with T-Max 400 developed in replenished X-Tol.

Focus seems to be where I was aiming.
The most recent was a part of a roll of HP5+ in my Olympus XA-2, because I needed to test out my X-Tol working solution - I hadn't developed any film for a bit. The X-Tol seems fine. Those negatives haven't been printed or scanned yet.

 

[murdockhendrix]

Bronica EC-TL, Bronica 50mm f/3.5 Nikkor-H, Catlabs X Film 320 Pro, shot at ISO 200, used a Zomei 82mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by 5% per the B's guide.


Bronica EC-TL, Bronica 100mm f2.8 Zenzanon, Kentmere Pan 100, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 10:56m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by 5% per the B's guide.

Orchid in June by Richard Hendrix, on Flickr

 

[Paul Howell]

Konica T, 52 1.8, Arista Pro 100, HC 110 B,

 

[Philippe-Georges]

Right now in the studio, for a sculptor's portfolio: Hasselblad Flexbody + S-Planar 120mm on Fp4+ @ 64ASA, with ROSCO LitePad Gaffer's Kit LED lights.
Will be developed in ADOX XT-3.

 

[Ronny H]

Picked up a film from the lab today.
Meopta Flexaret IVa, film is an Ilford Pan f Plus 50ASA.
Twelve three-quarters of twelve pictures were taken.
The frame counter was stuck and only started counting after the 5th frame. That's why there was almost a whole picture more.

 

[Donald Qualls]

Instax Mini 9 with recently (2023) expired Instax Monochrome, for a picture of my cat. A little overexposed as of an hour after exposure, but might have darkened a little more since -- and the cat has a lot of white on her.

 

[Andrew O'Neill]

14x17 XRAY. D-23 1+2.

 

[GregY]

Leica M4 & Rolleiflex, Tandem with Ilford FP4+/Kodak Tri-X. Processed in Pyrocat HD.
(35mm test print below on Ultrafine fb)

 

[88E30M50]

Pentax MX, Ilford FP4+ through a Pentax 40mm f2.8 Pancake lens and I developed it in HC-110 H dilution. It was just family photos while visiting Pittsburgh.

 

[murdockhendrix]

Bronica EC-TL, Bronica 100mm f2.8 Zenzanon, Catlabs X Film 320 Pro, shot at ISO 200, used a Zomei 67mm IR 720nm filter, developed at home using B's Processor, Photographers Formulary TD-16, 1:1, 5:45m at 20° C, JOBO 1520 tank, 3 min pre-wash, used quality volume (500ml for JOBO 1520), decreased development time by 5% per the B's Processor guide.

Kayak Racks by Richard Hendrix, on Flickr

 

[88E30M50]

I just shot a quick test roll of Kentmere 100 in 120 through an Agfa Jsolette V. I developed it in HC110-H for 6:30 and the results look good so far. I'll try to scan those tonight.

 

[Danner]

Bronica GS-1, 100mm lens, HP5+ developed in ID-11 at 1+1, 10 minutes @ 73ºF. Negs had very workable density, I was pleased as I normally develop with XTOL.

 

[AnselMortensen]

I am having a hard time getting contrast and density from some 8x10 Foma Retropan 320 Soft.
2 sheets, same subject, same exposure.
First sheet processed per Massive Dev Chart with Rodinal 1+25.
Second sheet processed for 15 minutes in stock D-19 @ 70°F as a "Hail Mary"..and both sheets look identical.

It appears to be an ~ EI 125 film for the rest of the box, according to my methodology.

Bizarre film.

Next up: Paper developer!

 

[Mr Flibble]

I've only shot Retropan 320 soft in 35mm and 120, never really like the results I got with the Massive Dev chart recipes for that film.
But then again, I was not using it for its "intended purpose" of vintage grainy portraits most of the time.


Last roll I shot was Kentmere 100, with a Leica MD-2 with Voigtländer 15mm f/4.5 Super Wide-Heliar.

HC-110, dilution H (1+63), 16min @ 20C

 

[Donald Qualls]

It appears to be an ~ EI 125 film for the rest of the box, according to my methodology.

That matches well with what I've seen shooting it in 120 -- EI 125 seems about right. Nice stuff at that speed.

Edit: Oh, woops. I read that as Catlabs X 320, which is a pretty nice EI 125. I haven't tried Fomapan 320 Soft (shoot of lot of their 100 and 400, though).