What is a good, cheap handheld exposure meter ?

mgb74

Subscriber
Joined
Jan 24, 2005
Messages
4,774
Location
MN and MA US
Format
Multi Format
I have a number of meters but I usually end of grabbing my Sekonic Twinmate. Simple, small, plenty accurate for my needs. By contrast, I have a Gossen Digisix and find it to awkward to change settings. Maybe if I used it more often it wouldn't be awkward.

TTArtisans has a tiny meter like the Revini mentioned in post #21. I have one of their lenses and like the build quality (for the price). Might be worth looking into.
 

benveniste

Subscriber
Joined
Nov 1, 2007
Messages
530
Format
Multi Format
I realize this is heresy, but one of the least expensive ways to do spot metering is with a digital point and shoot with that feature. For example, the Kodak PIXPRO FZ55 sells new for $99 and includes a spot metering mode. Used models are even less.

While I've owned a Minolta Light Meter IV F for about 20 years and it works well for me, I only have the 10-degree spot meter attachment. So except for flash metering, I'm more likely to use the Pocket Light Meter app on my iPhone, which also gives me color temperature. I even have an inexpensive clip-on dome for incident light, or at least something close enough to it.
 

Nitroplait

Subscriber
Joined
Jul 13, 2020
Messages
821
Location
Europe (EU)
Format
Multi Format
GaryFlorida said:
In these modern times, is there any cheap and accurate hand held light meter I can buy? Please advise.
Thanks.
Click to expand...
The latest version of Sekonic L-308 you can afford. Easy direct readout. Direct or incident metering.
All the “modern” match needle meters are for hipsters with too much free time.
 

Alan Edward Klein

Member
Joined
Aug 29, 2017
Messages
9,568
Location
New Jersey formerly NYC
Format
Multi Format

I'm like you. I used to use my Minolta IIIf with 10 degree spot only. Incident and reflective. (I thought your IV comes with a 5 degree?) Now I often use my digital Olympus E-PL1 micro 4/3 camera as a meter. It has matrix, center average, and spot. Reflective only, no incident readings.) The added advantage over dedicated light meters is that it has a histogram and blinkies. It also can be switched to BW so I can see what BW film would look like. I also use it as a director's viewfinder setting up my shots and selecting which lens to use before setting up the film camera and tripod. I also use it to take a quick video of the subject while dictating the settings I use. These can be transcribed later.
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,252
Location
Cleveland, Ohio
Format
Multi Format
Nitroplait said:
All the “modern” match needle meters are for hipsters with too much free time.
Click to expand...

Great!! I've gone straight from old fart to Gen Z. I feel young again... Well, no, I don't.

I much prefer meters that have dials on them. That mine have needles instead of LCD's doesn't bother me. If I need a new meter I will probably get a Gossen Digisix.
 

Paul Howell

Subscriber
Joined
Dec 23, 2004
Messages
9,783
Location
Scottsdale Az
Format
Multi Format
I use a Gossen SCB. mine was modified by Zone VI with a zone scale and perhaps adjusted for B&W as opposed to color. I also use a Weston Master 6, it is selenium cell meter but is spot on, with a 1/2 stop of the Gossen and my Minolta 9 in average mode. The Master 6 is easy to with one hand while the Gossen I find takes two hands, one hold the meter the other to turn the dial to match the diodes. Both the Weston and Gossen have a incident meter function, with the Weston you need to the inversa cone tha clips over the light cell, while the Gossen has a small dome that slides over the cell which is handy. The Weston in incident mode matches my Sekonic incident meter while to the Gossen is almost a stop off. With older meters it is just a matter of time until the cells will no longer be accurate. Yesterday I tossed out my Weston Ranger 9s, both were over 3 stops off and I could not bring back into adjustment. I am looking for a newer digital readout meter.
 

callsign_BULL

Member
Joined
Jun 23, 2022
Messages
10
Location
Williamsburg, VA
Format
Multi Format
I am back to using my 55 y/o Gossen Super Pilot CdS. It is still accurate with the proper voltage (WEIN zinc-air cell or #386 silver-oxide in MR-9 adapter) and is very capable, including down to EV -6. I also have two defunct Gossen Luna Pro SBCs. Therein lies the problem - no one in N. Am. or elsewhere will repair "legacy" Gossens, not even Gossen in Germany. So, if anything happens to my Super Pilot I'll be looking at Sekonic - they do have US service.
 
Last edited:
OP
OP

GaryFlorida

Member
Joined
Apr 11, 2012
Messages
306
Location
Venice
Format
Multi Format

yes I see . Thank you. That Luna Lux is almost as big as an SLR. The FE is the Nikon FE SLR camera that has a very very good meter.
 
OP
OP

GaryFlorida

Member
Joined
Apr 11, 2012
Messages
306
Location
Venice
Format
Multi Format

This is the kind my dad left me. Is it selenium? Even though it doesnt have the bumpy, glass block type lens on it?

Lentar Exposure Meter Model PR-66 NOS Original Box Vintage | eBay

Find many great new & used options and get the best deals for Lentar Exposure Meter Model PR-66 NOS Original Box Vintage at the best online prices at eBay! Free shipping for many products!
www.ebay.com
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,423
Location
Southern California
Format
Multi Format
I too strongly recommend the Gossen Lunapro SBC is a good "low cost" and accurate light meter. It can be found on ebay for ~$50 or so and it takes 9v batteries and has spot meter attachments available.
 

Paul Howell

Subscriber
Joined
Dec 23, 2004
Messages
9,783
Location
Scottsdale Az
Format
Multi Format
I use a Weston VI, it is selenium, I just checked against my Gossen SBC, spot on. In low light the SBC is much better. If you are for cheap then look for a working GE DW 68, it is a selenium cell, comes with hood. In goodlight the lid is closed, in dimer light the lib pops up, in very poor lighting the hood comes off. I have one, I still use when shooting with my Argus C3, although it matches my Watson and Gossen and I could use it all the time. The trick is making sure it is working. Somewhat fiddley to set the ASA.

All of my old CdS meters have failed or on last legs, My Soligor spot meter is dodgy, as the meters in my older cameras Pentax, Topcon, Petri, Konica. I just tossed out my Weston Ranger 9s, CdS.
 
OP
OP

GaryFlorida

Member
Joined
Apr 11, 2012
Messages
306
Location
Venice
Format
Multi Format
Sirius Glass said:
I too strongly recommend the Gossen Lunapro SBC is a good "low cost" and accurate light meter. It can be found on ebay for ~$50 or so and it takes 9v batteries and has spot meter attachments available.
Click to expand...

doesnt it use two 1.35v mercury batteries?
 

Nicholas Lindan

Advertiser
Advertiser
Joined
Sep 2, 2006
Messages
4,252
Location
Cleveland, Ohio
Format
Multi Format
GaryFlorida said:
This is the kind my dad left me. Is it selenium?
Click to expand...

It's a CdS meter. Anything old(ish) that takes a button cell battery uses a CdS element for sensing light. The meter will also have a press-to-read switch on the side - not definitive as Se meters with trapped needle movements can also have a switch on the side that releases the needle so you can get a reading.
 

runswithsizzers

Subscriber
Joined
Jan 19, 2019
Messages
1,781
Location
SW Missouri, USA
Format
Multi Format
Without seeing the front of the meter, I can't tell if your Lentar meter has a selenium cell.

But looking at the owner's manual for the Lentar PR-66 <https://www.cameramanuals.org/flashes_meters/lentar_pr-66.pdf> I see it has a CdS photo cell, so no, not selenium.
 

Luckless

Member
Joined
Feb 9, 2016
Messages
1,364
Location
Canada
Format
Multi Format
Nitroplait said:
The latest version of Sekonic L-308 you can afford. Easy direct readout. Direct or incident metering.
All the “modern” match needle meters are for hipsters with too much free time.
Click to expand...

Funny that you suggest something like the L-308 based on time, given that I find they take too long to fiddle with to get the settings as I want. My main meters are dial-number match rather than needle match, but it is basically the same concept either way, and I find they are so much faster to work with simply because they have fewer functions and less to faff about with.

The mechanical dial scale is just easier and faster to get information back from to make decisions.

Metering in ISO 400 for my main camera but want to take the next photo on my secondary camera with ISO 100 film? Don't change settings, just twist the dial [that I'm already naturally holding in my fingers just to read the thing] back two whole stops.

Applying filter corrections to the exposure? Don't change settings, just twist the dial. [We'll ignore the risk of twisting it the wrong way... That's just me being dumb and I could totally apply that same error with digital settings I bet.]

Debating aperture vs time setting options, they're all right there on the dial for you.


Battery died and you forgot to check spares were still in today's gear bag? It is still a very useful tool for Sunny-16 eyeballing.

Physical dial meters are just better* than their fancy 'full digital display' cousins.


*Your mileage may vary and your personal needs should not be ignored for this tongue in cheek commentary.

I'm generally a fan of my Gossen Digiflash2, but dislike the lack of a back button option when changing settings or modes. And personally have found all the other modes beyond meter and flash meter to be annoying, but that would be resolved with a back button...

And yes, I do have a beard and typically wear a flat cap. Why do you ask?
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,351
Location
Delta, BC Canada
Format
Medium Format
GaryFlorida said:
doesnt it use two 1.35v mercury batteries?
Click to expand...

No - the SBC version is the more modern version and it uses the 9V battery.
It is badged as a LunaPro in only one country in the world - the USA.
Everywhere else it is badged as a Profisix.
It isn't as small as my Gossen Digiflash or the simpler non-flash metering Digisix version, but it isn't as large as the photo above makes it appear.
The Profisix/LunaPro SBC is a system meter that can be used with a of number of attachments like a flash meter attachment or a spot meter attachment or an enlarging meter attachment etc.
I had and used one for years and it was great.
 

runswithsizzers

Subscriber
Joined
Jan 19, 2019
Messages
1,781
Location
SW Missouri, USA
Format
Multi Format
GaryFlorida said:
doesnt it use two 1.35v mercury batteries?
Click to expand...

I hesitate to bring it up, because the model names for Gossen meters are such a mess. @Sirius Glass is recommending the "Gossen Lunapro SBC" -- the SBC part indicates the later model which does take a 9V battery. The older model, "Gossen Lunapro" without the SBC takes the mercury batteries.

Having said that, I believe almost every Gossen meter goes by a different model name in the US compared to the same meter sold in Europe, so it is somewhat difficult to talk about Gossen meters on an international forum.

oops, cross posted with @MattKing
 

ic-racer

Member
Joined
Feb 25, 2007
Messages
16,585
Location
USA
Format
Multi Format

I did not realize they sold a shoe adapter for the Digisix. I found this picture on the internet. Looks nice, I might have to get one to add to my collection of small meters.

 
OP
OP

GaryFlorida

Member
Joined
Apr 11, 2012
Messages
306
Location
Venice
Format
Multi Format

well now I have to get one Matt.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,351
Location
Delta, BC Canada
Format
Medium Format

Chan Tran

Subscriber
Joined
May 10, 2006
Messages
6,871
Location
Sachse, TX
Format
35mm
GaryFlorida said:
doesnt it use two 1.35v mercury batteries?
Click to expand...

The Gossen Luna Pro uses 2 1.35V mercury batteries and it has Cds cell. The Gossen Luna Pro SBC as its name implies has Silicon Blue Cell (SBC which is simply silicon photo cell with blue filter to correct for its spectral response as silicon photo cells are very sensitive to IR and red) and uses 9V battery.
 

cliveh

Subscriber
Joined
Oct 9, 2010
Messages
7,566
Format
35mm RF
I have one of these: -

Gossen Sixtry Color Finder Light Meter With Pouch | eBay

<p dir="ltr" style="margin-top:0; margin-bottom:0;">Tested and compared to a modern light meter and still giving consistent results and appears to under expose by about 1 stop. Has a couple of marks but still in reasonable condition. The leather case and metal chair are both in excellent...
www.ebay.co.uk

I never use it, but just like the design and the way it works. It is in a box somewhere.
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,608
Location
La-la-land
Format
Multi Format
Chan Tran said:
The Gossen Luna Pro uses 2 1.35V mercury batteries and it has Cds cell.
Click to expand...

Just for completeness, Gossen offers (once again) a voltage conversion device so "modern" silver cells can be used. It actually works quite good.
 

Chuck1

Member
Joined
Jul 4, 2022
Messages
682
Location
Arlington ma
Format
Multi Format
Sekonic l158 is tiny, doesn't use batteries and for $20 it a great backup to keep in your bag.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…