- Joined
- Oct 31, 2006
- Messages
- 136
- Format
- Medium Format
A few ideas I am not going to try myself (still seems a bit of a hassle, but doable) Some of those APS cameras look nice; I am tempted.
- get one of those razor blade film slitters ( have one for minox film, and it works great)
- set the blades to cut the right 30mm width but leave one row of 35mm perforations in place
- make a 3d printed aps canister ( a lot of work for the first person to do it)
- you might be able to shoot as is and just shoot blank frames after each shot
- or you could tape over some of the 35mm holes ( seems easier than punching holes ) but applying little bits of tape in the dark is probably not fun, even with the right jig to hold and advance the film in the dark
- get one of those razor blade film slitters ( have one for minox film, and it works great)
- set the blades to cut the right 30mm width but leave one row of 35mm perforations in place
- make a 3d printed aps canister ( a lot of work for the first person to do it)
- you might be able to shoot as is and just shoot blank frames after each shot
- or you could tape over some of the 35mm holes ( seems easier than punching holes ) but applying little bits of tape in the dark is probably not fun, even with the right jig to hold and advance the film in the dark
