what waS your last photography related purchase?

Bikerider · Jun 30, 2020

A used but looking brand new camera holdall which is also a rucksack. I can carry my equipment on my back without worry and above the base where the bag is there is enough room for a waterproof jacket and a container with a bit of food. New price £125 price to me with shipping £42 a good deal.

TheFlyingCamera · Jun 30, 2020

two 1L kits of c-41 for developing a bunch of 120 Portra (mostly 160, with a touch of 400 tossed in).

Ko.Fe. · Jun 30, 2020

Nikkor 50 1.4 S

Dennis-B · Jun 30, 2020

Although I have a Sears Tower (Busch Pressman D) and a Super Graphic, which I use for field cameras and limited movement, my local used dealer had this one on his eBay site. I've been eyeballing it for a couple of weeks, and pulled the "Buy It Now" trigger today. This is a Meridian Model B. It's a late 1940's camera, and built of aluminum, with a lot of movement built into a press camera. It does use 4x4 lens boards (Graphic View), although the light baffle on the board doesn't allow it to sit flush. I ordered some 11 ga 4x4 plates, and I'll make my own. This one is built like a tank.

Peter Schrager · Jul 1, 2020

gold coffee filter for filtering my POP emulsion
glyoxal for emulsion hardening
50 sheets Foma 100/8x10
have a great day everyone!!
Best, Peter

Peter Schrager · Jul 1, 2020

Dennis-B said:
Although I have a Sears Tower (Busch Pressman D) and a Super Graphic, which I use for field cameras and limited movement, my local used dealer had this one on his eBay site. I've been eyeballing it for a couple of weeks, and pulled the "Buy It Now" trigger today. This is a Meridian Model B. It's a late 1940's camera, and built of aluminum, with a lot of movement built into a press camera. It does use 4x4 lens boards (Graphic View), although the light baffle on the board doesn't allow it to sit flush. I ordered some 11 ga 4x4 plates, and I'll make my own. This one is built like a tank.

View attachment 249427

nice camera enjoy and make pix!!!

Donald Qualls · Jul 1, 2020

I just bought a 100 foot roll of .EDU Ultra 400 (aka Fomapan) from B&H. Adorama had a better price, but they were out of stock; B&H had it lower than Freestyle and free shipping. Not much more than half the price of Ilford, below half of Kodak's 400 speed offerings.

Also bought yellow, orange, and red filters in 77mm size for my RB67 from the same Hong Kong seller where I got the set for my Kiev/Jupiter-8.

abruzzi · Jul 2, 2020

a Domke F-2 to carry around my Master Technika. The more I use them, the more I love Domke bags.

Andrew O'Neill · Jul 3, 2020

15 rolls of 120 Rollei IR. Jacques at Argentix was kind enough to give me a discount, too!

pbromaghin · Jul 3, 2020

5 rolls of Ektar in 35mm and 5 in 120, 5 of SFX in 120, a new changing bag, 25 PrintFile 35mm storage sheets, and a bag of D-76.

Donald Qualls · Jul 4, 2020

I probably shouldn't have, but...

I just bought a Fuji Instax Mini 9 camera and two packs of Monochrome film for it. For what I paid, I'm less concerned about how long Fuji will keep making the film...

John Bragg · Jul 4, 2020

A pair of vintage Vivitar lenses. 70-150 f3.8 in OM mount and a 75-205 f3.8 in Nikon Ai. I had the 75-205 years ago in Canon FD mount and it was a fine performer. Always regretted parting with it.

David A. Goldfarb · Jul 6, 2020

New old Leitz tabletop tripod. Amazing how this still hasn't been topped in all these years

eli griggs · Jul 9, 2020

A set of long shaft Wiha precision slotted and Phillips screwdrivers, 2.5, 3, 4mm slotted, with 150mm shaft and 300mm overall length, together with Phillips #0 and #1, same lengths as above.

I also had received the Vessel set of JSI and slotted precision screwdrivers I mentioned before, with 0, 00, 000, 0000 JIS heads and 0.9 and 0.7 mm slotted drivers.

All of these are nice additions, filling in my small tool, equipment gaps and the extra lengths are coming in handy already.

I will also wait until I can and get a set of Wiha precision electrically insulated drivers, as I'm repairing some flash heads, and having once touched the wrong thing in a Kodak disposable camera, with it's own flash, I do no ever want to receive a shock from a Vivitar 285, 285HV or 283, period.

Donald Qualls · Jul 9, 2020

eli griggs said:
I do no ever want to receive a shock from a Vivitar 285, 285HV or 283, period.

No argument there -- 450+V with up to several hundred amps behind it is potentially lethal.

ColdEye · Jul 9, 2020

Went a bit over board, some museum quality acrylic sheets for my DSLR scanning, some 1L bottles, a SA 90/8 and some Arista 200 in 4x5.

TheFlyingCamera · Jul 9, 2020

Just scored a 190mm Kodak Wide-Field Ektar and an Ilex 5 shutter, both with their flanges. The Wide-Field Ektar should JUST cover 8x10, might get a little mushy in the corners. And the best part is that for the price I paid, I either got the Ilex 5 or the Wide-Field Ektar for free.

eli griggs · Jul 10, 2020

I just received the two, 50mm shafted Vessel JIS 000 and 0000 screwdrivers I ordered a few weeks back from Japan.

I'm surprised they came this 'quickly' as I was no expecting them until late August - mid-September.

eli griggs · Jul 10, 2020

"And the best part is that for the price I paid, I either got the Ilex 5 or the Wide-Field Ektar for free.

That's great, I hope you'll enjoy them in use, soon.

eli griggs · Jul 10, 2020

Donald Qualls said:
No argument there -- 450+V with up to several hundred amps behind it is potentially lethal.

Yes, in fact, I might just get the Harbor Freight Precision Isolated set instead of the more expensive Wiha, just so I'm using the right screwdriver to finish up this open flash I'm working on now.

$8 vs. $45, I guess I can see if the lesser of the two brands will fill my needs.

Cheers.

Donald Qualls · Jul 10, 2020

A pair of heavy rubber gloves might not come amiss; nor would a discharging tool (10K 1/2 W or larger resistor with a clip and a probe -- for no-fireworks removal of stored energy in large capacitors).

AnselMortensen · Jul 11, 2020

2 used lensboards, stop bath, some cable releases, eye cups, and an accessory shoe.

rst · Jul 11, 2020

Just yesterday I got a Wista 45 SP in very good condition. Now waiting for the lens to arrive. To try it, I have an old Schneider Kreuznach Xenar 4.5/180mm which I mounted on a DIY lensboard that I cut from a sheet of cardboard. Good enough for playing around with the camera.

GLS · Jul 11, 2020

Silvestri Professional 50cm cable release.
Paramo dark cloth.
Schneider 6x aspherical MC loupe.

TheFlyingCamera · Jul 11, 2020

eli griggs said:
"And the best part is that for the price I paid, I either got the Ilex 5 or the Wide-Field Ektar for free.

That's great, I hope you'll enjoy them in use, soon.

Oh, I will. I'll have to get the Wide-Field Ektar mounted to a lens board (pre-drilled boards for an Ilex 4 are not exactly commonplace), but I plan to use it as soon as I can get that done. The Ilex 5 is going to get re-purposed to put a Zeiss 600mm Apo-Germinar into a shutter so I can use it with my 14x17.

what waS your last photography related purchase?

Bikerider

TheFlyingCamera

Membership Council

Ko.Fe.

Dennis-B

Peter Schrager

Peter Schrager

Donald Qualls

abruzzi

Andrew O'Neill

Moderator

pbromaghin

Donald Qualls

John Bragg

David A. Goldfarb

Moderator

eli griggs

Donald Qualls

ColdEye

TheFlyingCamera

Membership Council

eli griggs

eli griggs

eli griggs

Donald Qualls

AnselMortensen

rst

GLS

TheFlyingCamera

Membership Council

what waS your last photography related purchase?

Membership Council

Moderator

Moderator

Membership Council

Membership Council

Privacy & Transparency

Privacy & Transparency