what was the last camera you used, last film and how was it developed

[Philippe-Georges]

ILFORD FP4 in a Hasselblad Flexbody and S-Planar 120mm, not processed yet but will be in ADOX XT-3.

 

[weasel]

zone v1 4x5, foma 200 d76 1:1

 

[jay moussy]

Foma 100, Canon FT QL, and Canon T70, Rodinal 1:50, 8 mins.
Both cameras new to me, the FT metering, on hearing-aid battery, seems OK, maybe a tiny amount of underexposure?

 

[Thunder Blunder]

Canonet QL17 GIII, Ortho Plus, 510 Pyro 1+200 20 minute semi-stand. It's hanging up to dry right now.

 

[mrosenlof]

Ilford FP4+ 4x5 in a Canham wood 4x5/5x7. Fujinon CMW 125mm lens. Will develop later today in HC-110 1:50 for about 12 minutes.

 

[Dennis S]

Today I had out ny Canon EF SLR with a FL 50 f1.4 lens. Fomapan 200 @ 250 and will be developing it in PMK.

 

[Dusty Negative]

Mamiya RB67.

Foma Retropan Soft, EI 640, HC-110, Push 1

 

[Javier González]

Yashica Electro 35 GSN, AgfaPhoto APX100 (not the classic APX100), Rodinal 1+50, 12 minutes (I think). This film is cheap, specially purchased in 30 feet rolls, and pretty decent. I frequently use my old Yashica E35 (my very first camera) for available light. Very sharp lens even at f2.

 

[Helios 1984]

- Zeiss Ikon Contaflex IV w/ Tessar 50mm f/2.8
- TMax 100 processed in Rondinax 35 with Agfa Rodinal 1:40 for 9:10

 

[Kodachromeguy]

Hasselblad XPan with the 30mm ƒ/5.6 lens (a generous friend loaned me this amazing kit).
Fuji Acros film, EI=80, developed in Xtol by Northeast Photographic in Bath, Maine. I merged two 24×36mm scans with Photoshop CS6.
This is a barn in Swiftown, Mississippi (north of Belzoni)

 

[Don_ih]

Last camera was a Minolta XE7 with MZ3 developed in FX37. Look at all them letters and numbers.

 

[madNbad]

Leica M4, Voigtlander Helier 4.5 15mm LTM, Kodak 400TX, Rollei One Shot R09.

 

[Rayt]

Rolleiflex 2.8A Portra 400

5 frames to go

 

[AnselMortensen]

Burke & James 5x7 Rembrandt Camera Model II, Wollensak 9" f4 Verito, 5x7 Arista 400 EDU.
Film not developed yet, but will be in a day or so...Rodinal 1+50.

 

[Tel]

Topcon Primo Jr. Loaded with 46mm Portra 160NC (AKA 127) expired 2008. Souped Unicolor C-41 (roll number 20 from my April 15 batch of chemistry). Mixed up a fresh batch today after I developed this roll.

 

[Paul Manuell]

Pentax 645NII, Kodak Portra 400, not yet developed

 

[markjwyatt]

Mamiya C330f, Agfapan APX 100 (expired 2004). I wanted to try WD2D+ (really I wanted to try Pyro, and this seemed the best choice), and thought Agfapan would be a good candidate. Here are a couple of negative scans.


Trunk Roots by Mark Wyatt, on Flickr


classical by Mark Wyatt, on Flickr

 

[Cubao]

View attachment 300273 Mamiya RB67.

Foma Retropan Soft, EI 640, HC-110, Push 1

Very nice portrait!

 

[benjiboy]

Fuji Reala 100, shot in a Canon F1n, commercially processed.

 

[Arthurwg]

Leica M6, in Venice. Commercially processed. AOK.

 

[TheFlyingCamera]

FP4+ in a Holga. Developed in Rodinal 1:50. Self-processed.

 

[Andrew O'Neill]

RB67 with assorted lenses. Delta 100 and 400, Rollei IR... Haven't developed any yet as I'm still on my mini roadtrip shooting... They'll probably get Xtol-R. I'll keep shooting same films, including HP5 and Pan F, throughout today and tomorrow... Then long drive to follow.

 

[Cubao]

Contax RX, prime lens 50/1.7, Foma 200, dev. in FX-39 II

 

[Dusty Negative]

Very nice portrait!

Thank you.

 

[Tel]

Bit the bullet and went back to Manhattan to do some street shooting. Took my Yashica 44, loaded with Portra 160NC (exp. 2008). For the fun of it I decided to try developing at room temp, as Reinhold from Filmwasters used to do. Souped it at 82 degrees F for 11:45 per Reinhold's development chart. Blix was 8 minutes.