what was the last camera you used, last film and how was it developed

[canonshotz]

Nikon F5, Ilford FP4+
Not developed yet

 

[Raghu Kuvempunagar]

Nikon FE + Nikkor 55mm f2.8 Micro + Kodak Double X.

Developed in 500ml of D-76 1:10 + 0.5g Sodium Hydroxide.

Test strip to figure out the development time for this combination of film + developer.

 

[Helios 1984]

Contaflex IV w/ Carl Zeiss Tesar 50mm f/2.8 with expired Tmax 100 which I've processed in my Rondinax with Afga Rodinax 1:40 for 8:40 minutes at 19.5c.

 

[Ernst-Jan]

Canon AV-1 with Canon 28 f/2.8. Camera was loaded with Silberra U400 and yet have to develop it, I'll use ID-11 for that.
Also took a few shots on Foma 200 with this camera.

 

[benjiboy]

Ilford Delta 400, in a Canon EF with a Canon FD 35 mm f 2 Thorium lens. Not yet finished.

 

[Donald Qualls]

Last one I finished a roll in was my Baby Ikonta (half frame 127, 50 mm f/6.3 Novar Anastigmat, 25-50-75 Derval shutter), Rerapan 100, not yet processed. Daily carry at the moment is my Welta Weltini, currently loaded with Superia Xtra 400. I'm way behind on processing film.

 

[tokam]

Ilford Delta 400, in a Canon EF with a Canon FD 35 mm f 2 Thorium lens. Not yet finished.

Ooooh, sounds nice! I have that camera and would like that lens. Perhaps, one day. Have tried Delta 100 but not yet Delta 400. Too much bulk loaded films of other types including TMax 400 which will have to do for now, Probably no more Kodak in future as their bulk roll prices in Australia are through the roof and I don't like using 36 exp rolls - too long to finish.

 

[RalphLambrecht]

Ilford FP4+ in Rodinal 1+50 developed in the Labbox to perfection.

 

[Andrew O'Neill]

RB67. Pan F. Xtol 1+1, D-23 1+3. Mainly for comparison.

 

[catacore]

Kodak Tri-X 400 shot with Kodak Retina IIIC and developed in R09 (Rodinal) 1+50 for 13 minutes. My first Tri-X, and came out a bit grainier than I was hoping (or expecting).

 

[benjiboy]

Ooooh, sounds nice! I have that camera and would like that lens. Perhaps, one day. Have tried Delta 100 but not yet Delta 400. Too much bulk loaded films of other types including TMax 400 which will have to do for now, Probably no more Kodak in future as their bulk roll prices in Australia are through the roof and I don't like using 36 exp rolls - too long to finish.

I had been looking for an EF in good condition for about 25 years, and I went into a local camera shop about ten years ago and they had in a showcase a mint E.F with an F.D 35 f 2 Thorium lens attached at a silly cheap price, I asked if the price was just for the body, they said: "no it included the lens", so I bit their hands off.

 

[abruzzi]

A sheet of 5x7 Arista 100 (Foma 100) in a Rittreck View, with a 12” Dagor. The camer is new (to me) so this was a test shot to make sure everything works. Developed in a Stearman 810 tray in Adox Rodinal 1:50.

I love that all this stuff is still available to me, especially companies like Adox, Stearman, and of course, Foma.

 

[AnselMortensen]

B&J Rembrandt 5x7 w/12" Wollensak Series II Velostigmat f4.5......13x18cm Fujichrome 64T.
Test sheets on the way to the lab.

 

[Disconnekt]

Sears TLS, a roll of Agfachrome 64, Kodakchrome 64, and Quick Film ColorSlide 100 sent to Old School Film Lab (along with a roll of Kodacolor-X that I got for free from a forum member here, film was already rewinded into the cassette so Im sending it to see if anythings on it)

 

[alanrockwood]

Last film camera was a Canon Rebel T2 using Fomapan 100. Film not developed yet.

 

[Donald Qualls]

Sears TLS

I've got one of those; it's the same as a Ricoh Singlex TLS. I prefer the Singlex II, but my Singlex II has an intermittent shutter problem.

 

[Disconnekt]

I've got one of those; it's the same as a Ricoh Singlex TLS. I prefer the Singlex II, but my Singlex II has an intermittent shutter problem.

I got a CLA for mine at a place called Camera Service Pro, the total was $222 (Just for the CLA it was ~$160, I also had a lens that had a dented filter ring that I got fixed which added to the price, and shipping from Georgia to Cali with UPS was $27)

 

[mshchem]

A friend came over yesterday and he let me develop 5 rolls of film for him. We used a Jobo tank, inversion. I had forgotten how much work it is when not using the processor

 

[ricardo12458]

canon t70
macophoto rpx 25
iso 16, d-76 1+1 (no pull in dev)

 

[Donald Qualls]

We used a Jobo tank, inversion. I had forgotten how much work it is when not using the processor

Nah, work is something they have to pay you to do. Processing a few rolls of film is play.

 

[Patrick Robert James]

Last roll was in a Minox C with Eastman 5222 developed in Sooperhooch.

 

[mshchem]

Nah, work is something they have to pay you to do. Processing a few rolls of film is play.

Absolutely!!

 

[mshchem]

Last roll was in a Minox C with Eastman 5222 developed in Sooperhooch.

What in the world is Sooperhooch? Sounds intoxicating.

 

[RalphLambrecht]

Nah, work is something they have to pay you to do. Processing a few rolls of film is play.

+1

 

[Patrick Robert James]

What in the world is Sooperhooch? Sounds intoxicating.

It is hooch that is sooper. Lol.

Something I've been working on. Just a modification of an old developer. I used it a few years ago but i had some issues with it. Thinking about it again recently I realized what the issues were so I thought I'd give it another go.