Born2Late
Member
I am sorry if this is the wrong forum for this topic, but since I primarily process B&W and probably most here do it's the spot I chose.
I mix my chemicals with distilled water and I've had good luck with the results. Over the last 12 to 18 months I've had numerous unopened jugs start leaking while sitting on the shelf. I've tried different brands and had specimens of all leak, not every jug, but all brands. They are all stored in my basement darkroom where the temperature is very constant and never below about 65 degrees. I went down to my darkroom tonight and found one had leaked again with near disastrous results, another day and it would have been. I guess I'll have to start storing the jugs in a large plastic tray or transfer the contents to glass jugs.
Anyway, just a word to the wise.
I mix my chemicals with distilled water and I've had good luck with the results. Over the last 12 to 18 months I've had numerous unopened jugs start leaking while sitting on the shelf. I've tried different brands and had specimens of all leak, not every jug, but all brands. They are all stored in my basement darkroom where the temperature is very constant and never below about 65 degrees. I went down to my darkroom tonight and found one had leaked again with near disastrous results, another day and it would have been. I guess I'll have to start storing the jugs in a large plastic tray or transfer the contents to glass jugs.
Anyway, just a word to the wise.
