cooltouch
Member
Interesting. I had no idea there were so many different ways to calculate approximate megapixel equivalents of film. I have used the following methodology:
Assumptions:
A very fine grained film, capable of resolving 100 lp/mm
One line pair is equivalent to two pixels
Thus, for a 35mm (36mm x 24mm) slide or negative, we have:
(24mm x 100lp/mm x 2 pixels/lp) x (36mm x 100lp/mm x 2pixels/lp) = 34,560,000 pixel equivalents, or 34.6 megapixels.
In fact, whenever somebody brags to me about their DSLR out-resolving film, I point out to them that it won't, unless it's a 35mp camera.
After reading the other methods folks use to make this determination, well, mine may be off in actuality, but it still usually shuts up the pixel peepers.
Best,
Michael
Assumptions:
A very fine grained film, capable of resolving 100 lp/mm
One line pair is equivalent to two pixels
Thus, for a 35mm (36mm x 24mm) slide or negative, we have:
(24mm x 100lp/mm x 2 pixels/lp) x (36mm x 100lp/mm x 2pixels/lp) = 34,560,000 pixel equivalents, or 34.6 megapixels.
In fact, whenever somebody brags to me about their DSLR out-resolving film, I point out to them that it won't, unless it's a 35mp camera.
After reading the other methods folks use to make this determination, well, mine may be off in actuality, but it still usually shuts up the pixel peepers.

Best,
Michael