So I'd like to add a few more thoughts about this purple spots issue. now we all know that an ethanol/isopropyl wash would dissolve the purple spots in a few mins, even post-drying, and the solvent would turn pink afterwards. That confirms that the spots are non-water-soluble residuals of anti-halation layers, as opined by Foma themselves earlier.
This thread just made it up on top again and I noticed I had participated to it a while ago.
I would like to update my findings above in that I now have, finally, stumbled on a defective (dots) batch of Foma 100 in 120.
Batch number is 023856-4 (8/2027).
. Unfortunately, for my taste and based on my current understanding of the material, Kentmere MF film is absolutely no replacement for the beautiful Foma 100 and Foma 200.
Can I ask what are the differences that you have found between Foma 100 and 200 and presumably Kentmere 100 that decided you on Kentmere being no replacement?
Thanks
pentaxuser
I can definitely confirm, that I was able to remove these spots with a strong, fresh fixer and did not need any tensides or non-polar solvents. My experience also tells me, that this is rather a sensitizer dye sticking to silver ions than a non water soluble anti halation dye.
I haven't made any formal tests, and I have much more experience with Foma than with Kentmere. This means my lack of experience with Kentmere is possibly the culprit here.
Having said this, with the cameras and processing I use, I have so far been unable to replicate, with Kentmere 100, the incredibly beautiful highlights I routinely get with Foma 100 in 120.
There's probably a developer/dilution match that will give me what I seek with Kentmere 100, but so far I haven't found it (to be fair, I haven't tested many).
The question is whether I want to hope that they fix Foma 100 and stick to it, or move to Kentmere 100 and do some thorough testing to get what I want.
Maybe; maybe we are both right. would it be possible that a non-polar solvent such as IPA just dissolves the dye while a strong fixer removes the silver particles along with the dye attaching to them? in any sense, I use two-bath fixing and my 2nd stage fixer is quite fresh and potent confirmed by leader test. If that doesn't remove the dye, or the dye-silver complex/whatsoever, it really seems a dealbreaker for me to continue to use foma 120 format. I can't just discard my fixer each and every time. And if it's an dedicated super fixer to re-use, we are back to the problem of why foma needs an additional step/hassle/why don't we just use enthanol/IPA and all that...until one day we'll just say enough is enough and move on.
maybe all you need is to push Kentmere for 1 stop to get that extra highlights. That seems to be my experience with Kentmere 400.
Kentmere lacks contrast if exposed at box speed. Pulling makes it worse.
Has anyone got this to work with Retropan? I just got done soaking for about 15min in EtOH with no change. I'm doing 8x10 and the purple spots are more like specs. 1.4x enlargement they are not very noticeable. But the purple specs do bother me when under the loupe on the negatives. Maybe they will show on a 20x24".
I solved the multiple Foma issues: I don't buy Foma Films anymore.
Kentmere lacks contrast if exposed at box speed. Pulling makes it worse. Kentmere 100 can be exposed at 200 without becoming too hard. I use XT-3, 1+2, 16 Min. with excellent results.
they will be rolling out a new AHL formula fully soluble in water, possibly sometime during second half of this year or next year.
Need to agitate it like u do it with prints in a tray. Just soaking it in ethanol wont help much or at least it will need much longer time. 70% IPA seems to work as well, but also needs agitation.
Thanks I'll try it again.
Thanks. I just washed them away with 70% isopropyl for 5mins
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?