a Deardorff back? It seems my used 5x7 reducing back has been dropped or banged a bit and two pins are flush with the surface. No way can I get a grip on them without removing some of the surrounding wood. Any ideas on how to get a grip? Are these pins threaded for insertion? Or just pressed in? Thanks for any help with this puzzle!
Any suggestions on fixing the pins on
-
A
- Thread starter Sandman
- Start date
Recent Classifieds
-
For Sale Huge filter collection for sale!
- Started by Early Riser
-
For Sale FS: Yamasaki Tele-Congo 240mm f/6.3 Lens
- Started by B.S.Kumar
-
For Sale E6 and Color Chemicals, Stainless Steel Tanks Reels and film storage sleeves.
- Started by orbitaldebris
-
For Sale SILVESTRI RING N 1
- Started by Philippe-Georges
-
For Sale LINHOF AERO TECHNIKA 45 LENS COVER
- Started by Philippe-Georges
Forum statistics
Sandman
these pins are usually pressed or driven in. You may have to remove some of the surrounding wood to get ahold of the pin with a needlenose plier. After rmoving them you can insert a dowel into the remaining hole & reinsert the pin. A pilot hole would prevent you from cracking the frame.
these pins are usually pressed or driven in. You may have to remove some of the surrounding wood to get ahold of the pin with a needlenose plier. After rmoving them you can insert a dowel into the remaining hole & reinsert the pin. A pilot hole would prevent you from cracking the frame.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |