what was the last camera you used, last film and how was it developed

jtk · Apr 18, 2018

GRHazelton said:
Do you mean Pentax ME Super? While it has a vertically run metal shutter, probably the one by Copal, as far as I know it isn't titanium. To my knowledge the only Pentax titanium shutter is the horizontally run titanium foil shutter on the LX.

If not titanium, what do you believe it is?

Either way, I like metal shutters better than fabric even though they're vulnerable to dings.

joby · Apr 18, 2018

Leica M2, VC 35/2.5
Eastman Double-X @400
D76 1+1 12m

Theo Sulphate · Apr 18, 2018

For my "Too Common" project these last few months, I've been using:

Nikkormat FT2
28/3.5 Nikkor H

Kodak Ultramax 400, commercially developed and printed.

I'm really starting to like the Ultramax. Nice colors and a speed that lets me have good shutter speeds in low light.

LeftCoastKid · Apr 22, 2018

Slumming around town yesterday: Nikon F5 w/80-200 F2.8 ED AF-D Nikkor, and a Nikon F6 w/28-70 F2.8 ED AF-S Nikkor; both were loaded with Ektachrome E100G, with several additional rolls in my bag. Shot seven rolls and a bit over the course of the day. Into the freezer for the short term; likely to The Lab sometime towards the end of next week for processing.

pdeeh · Apr 23, 2018

I just developed a roll of agfavista200 in tetenal colour dev. I can't remember how long it's been sat there, a few months. Think I shot it in an olympus af-1 that I found in a charity shop for £3.50. Or was it the XA? Hmm.
Anyway. The tetenal's been sitting under the sink for about 3 years now. Still works.
Then I forgot you have to blix colour film and my blix went bad long since.
So I threw some ferri and bromide into a pot and used that. And fixed it in rapid.

TheFlyingCamera · Apr 23, 2018

Canham 8x10, Arista.EDU Ultra (Fomapan) 200, exposed at asa 100, will get developed this week in Pyrocat HD.

Mainecoonmaniac · Apr 23, 2018

An Olympus PEN 1/2 frame camera and Arista EDU 100. I processed the roll of film, but I still have to put it into negative sleeves.

Kawaiithulhu · Apr 27, 2018

Ran a roll of the new P3200 through my F3 and 105/2.5 - all incredibly boring indoors or contrasty night lighting situations. Developed in XTol 1:1 68deg with 60sec initial and 3 gentle inversions at each minute for 17 minutes (based on massive dev chart more or less).

Results: I really should filter my stock solution and the negatives came out more dense than I'm used to so I'll adjust the time down a few percent, but the grain pattern is beautiful and not clumped up or ragged in any way, just like I like.

darkroommike · Apr 28, 2018

Pentax MX, 50/1.4, Kentmere 400, to test some Tmax developer donated to the school, (the developer was bad, BTW).

R.Gould · Apr 28, 2018

last 3 cameras, Ensign 1220 last Monday, Franka Solida 3 on Wednesday and Werrmatic on Thursday, all Fomapan 400, first 2 120 and last 35mm, all developed in Rodinal 1/50
Results some lovely negatives that I realy need to print

David Lingham · Apr 28, 2018

Nikon F2A, FP4, D76 1+1.

glbeas · Apr 28, 2018

Bronica Sqai 50mm ps lens r72 filter with konica 750 in rodinal 1:50 6:30 @ 68f.

Marcelo Paniagua · May 1, 2018

Fujica AX3 with 50 f/1.6 and 28 f/3.5. Developed roll and waiting to print next Wednesday.

Marcelo

Sirius Glass · May 1, 2018

Nikon N75 with a 28mm to 300mm Tamron AF zoom lens and Kodak UltaColor 400 film.

Roger Thoms · May 3, 2018

810 Harman Titan, 5 sheets of APX 100 + 1 sheet of FP4. Processed in HC110 in one of those fancy Jobo machines. Did the processing at Art Intersection in Gilbert Arizona. Awesome facility. Going back on Thursday or Friday to print don’t a few on the negatives. This is my efforts for WPPD.

Roger

Peter Schrager · May 3, 2018

Roger Thoms said:
810 Harman Titan, 5 sheets of APX 100 + 1 sheet of FP4. Processed in HC110 in one of those fancy Jobo machines. Did the processing at Art Intersection in Gilbert Arizona. Awesome facility. Going back on Thursday or Friday to print don’t a few on the negatives. This is my efforts for WPPD.

Roger

Ditto...great place

R.Gould · May 3, 2018

Canon T50,fomapan 400,rodinal1/50

Steve Roberts · May 3, 2018

Revere 33 stereo - test roll following servicing.
FP4 developed in RO9 18 mins at 20 degs C. Looking good!

John_Nikon_F · May 4, 2018

FM2n, Ektar 100, processed by Kenmore Camera lab. Currently working on a roll of Ektar in the F3P (and have one waiting to be shot in both the F and the F5 - F2AS has HP5+, FM2n has TMZ-P3200, and FT2 has a roll of CineStill 50D).

-J

Theo Sulphate · May 4, 2018

Zeiss Nettar 515/16 (this is 6x6 format) with Portra 160 NC from 2007 that I'm rating at ISO 100.

Will have results next week.

Also using Rollei RPX 25 in my 1934 Leica III, Impossible Spectra in my Polaroid Image 1200, and more Kodak Ultramax 400 in my Nikkormat FT2.

.

guangong · May 4, 2018

Finally got around to finishing Acros 100 (only 3 more rolls of this film left) in Fuji GF 670, last for frames of Delta 100 in Hassy CM and last four frames of Delta 100 in Canon P. Remainder frames due somewhat to bad winter storms. Film waiting to be processed piling up because of other obligations. Lots of film to develop.
Right now using Retina B with Delta 100 and Leica M4 with HP5.
Oh yes, ever present in pocket a Minox. Now a Minox C with Delta 100 and Minox BL w Delta 400.

nimajneb · May 4, 2018

A Mamiya M645 1000s someone gave to me, because they don't use it anymore. I shot a roll of Arista Ultra EDU 100 and developed it in HC-110 Dilution B for 6 minutes.

Pentode · May 4, 2018

Agfa Karat IV
Fomapan 100
D-76 1:1 10 minutes @ 68deg F
30sec continuous agitation
3 inversions per minute thereafter

R.Gould · May 4, 2018

Rolleiflex this afternoon,just developed the film, Fomapan 400,in my usual Rodinal 1/50 for 12 minutes, looks fine,should print well

Dennis-B · May 4, 2018

Shot some tests with my "new" Hasselblad 500 C/M. Converted this shot to a reddish sepia using Affinity S/W. Original film is Ektar 100, developed C41.

One of the many abandoned buildings outside downtown Detroit.

what was the last camera you used, last film and how was it developed

Membership Council

Privacy & Transparency

Privacy & Transparency