What caused emulsion loss on this glass plate?

slackercrurster

Member
Joined
Oct 15, 2017
Messages
918
Location
L.A. - NYC - Rustbelt
Format
Multi Format
This was done around 1900 and is a dry plate. I've seen a lot of glass plates files with similar emulsion loss like this.

What was the cause?

Thanks



Photo: L.O.C.
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
21,509
Location
Europe
Format
Multi Format
Are there any other photos of this plate that show how it looks to the naked eye?
The reason I'm asking is that emulsion loss would result in no optical density (apart from the density of the glass itself), and that would render as solid black on an inverted negative. This shows up as pure white, which isn't consistent with emulsion loss as such.
 

F4U

Member
Joined
Jan 15, 2025
Messages
325
Location
Florida
Format
8x10 Format
Well it is glass, after all. Not a lot of "tooth" to glass. About like coating teflon with emulsion, or most anytihng else.
 

John Wiegerink

Subscriber
Joined
May 29, 2009
Messages
3,549
Location
Lake Station, MI
Format
Multi Format
I have some slides that have been munched on be teeny-tiny little creatures and it looks a little similar to this, but who knows for sure. The slides were accidentally lost in a box stored on the floor of my parents garage for years. It was a sad find since most were from my tour in Vietnam way back in 1969. I didn't find the slides until after my father's passing in 1989 when I was cleaning the garage for my mother. I always figured the little creatures were going after the gelatin in the emulsion, but like I said, what do I know.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,169
Location
North Carolina
Format
Multi Format
koraks said:
Gelatin has a great affinity to glass, in fact. It bonds quite well.
Click to expand...

Worth noting in this context that some varieties of textured glass receive their texture by having chips pulled off with hydraulics and gelatin glue. In any case, I agree with the comment above, what we're seeing isn't emulsion loss, it's Dmax (assuming this is a transmission scan). If it's a reflective scan it might be something like dichroic fog.

It could also be due to paper stuck on the emulsion after long storage in an envelope or folder with slight dampness -- and the conservators elected not to risk further damage by trying to soak the paper off the gelatin.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,169
Location
North Carolina
Format
Multi Format
If it's not a negative, it's a reflective scan (from tintype etc.) or already a print. Reversal positives weren't really a major thing in the glass plate era.
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
21,509
Location
Europe
Format
Multi Format
Donald Qualls said:
If it's not a negative, it's a reflective scan (from tintype etc.) or already a print. Reversal positives weren't really a major thing in the glass plate era.
Click to expand...

I agree the likelihood is small, but it cannot be excluded at this point. Virtually always plates like these are negatives. It's conceivable someone contact printed one of these plates to another plate. I'm not aware of any examples, but they must exist, somewhere, surely.
In any case, this is part of the reason I asked the very first question in #2. A photo of the plate as it appears to the naked eye would clarify many things.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,169
Location
North Carolina
Format
Multi Format
koraks said:
A photo of the plate as it appears to the naked eye would clarify many things.
Click to expand...

The OP might not have access to the actual plate, though -- this might be an image from an online archive.
 

BrianShaw

Member
Joined
Nov 30, 2005
Messages
16,438
Location
La-la-land
Format
Multi Format
Magic lantern slide? EDIT: apparently not.

(And with the Library of Congress notation, the image likely was online. I seem to recall that if one digs through the LOC image page there is info about the nature of the media.)

EDIT:

[Concord, N.H., loading granite, New England granite quarry]

1 negative : glass ; 8 x 10 in.
www.loc.gov
 
Last edited:

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
21,509
Location
Europe
Format
Multi Format
Donald Qualls said:
The OP might not have access to the actual plate, though -- this might be an image from an online archive.
Click to expand...
Right, good point; looks like you're on to something:

[Concord, N.H., loading granite, New England granite quarry] - PICRYL - Public Domain Media Search Engine Public Domain Image

Download Image of [Concord, N.H., loading granite, New England granite quarry]. Free for commercial use, no attribution required. Public domain photograph - historical image of New Hampshire, United States, free to use, no copyright restrictions image - Picryl description. Dated: 01.01.1900...
timelessmoon.getarchive.net
Note how here on Shorpy they apparently used AI to fill in some of the gaps remaining after cropping:

Stone Poneys: 1907

Concord, New Hampshire, circa 1907. "Loading granite -- New England granite quarry." 8x10 inch dry plate glass negative, Detroit Publishing Company.
www.shorpy.com



BrianShaw said:
And with the Library of Congress notation, the image likely was online.
Click to expand...
Ah, great - got it: https://www.loc.gov/item/2016795520/

It's described as an 8x10" dry plate glass negative.

I think the white areas are a fluke and they are the result of an arbitrary choice in the digitization process to render areas of the plate that have no density information as pure white. It may have been stored originally as a transparency area which didn't carry over to the web view.
 

Donald Qualls

Subscriber
Joined
Jan 19, 2005
Messages
12,169
Location
North Carolina
Format
Multi Format
The only way to be sure would be to ask the conservators. To my eye, it looks as much like paper (which would scan as Dmax) that got stuck to damp gelatin, and that's all they could get off without risking further damage to the plate, but your explanation would fit, too.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…