Using a Speed Graphic hand held - doable?

[PKM-25]

Don't let it get sucked into the intake.

While working on the deck as an LSE ( Landing Signalman Enlisted ), about to conduct Vert Rep ( Vertical Replenishment ), I watched with suspicion as a PC ( Plane Captain ) haphazardly used a can of ACC ( Aircraft Cleaning Compound ) near the HSDD ( High Speed Divergent Duct ) of an F-14 ( Fighter number 14 ). About 30 minutes later, the pilots fired up that engine and I heard a "Braaaang!" and saw a puff of smoke.
The can of ACC ( Aircraft Cleaning Compound ) had rolled into the HSDD ( High Speed Divergent Duct ) and then went down the intake, bouncing off of the IGV's ( Inlet Guide Vanes ) and not causing any damage to the TF-30's ( Turbofan 30 ) 16 compressor stages, a borescope procedure revealed….It was a 3 pass FOD ( Foreign Object Damage ) walk though, delayed my op.

Acronyms….talk about off topic, LOL!

 

[lxdude]

Sounds like the ol' SNAFU.

At least it wasn't in vane!

 

[mhcfires]

We didn't have those problems on a destroyer.

 

[Discoman]

Without reading through all the entries because the internet is quite slow today, I'm just going to quickly throw in my two cents and leave, but also apologize if I repeated something someone said.
I've used a graflex handheld myself. Mine has a body trigger, so I hold onto that side with one hand, and put my other hand on the bottom of the focusing rail holder, with my thumb and forefinger on the one focus knob. I find that a hand below the camera entirely helps support the weight better than both hands on the side.
If you have a flash unit of the newer style, attaching that securely can give a good hold on the camera.
Now, if you attach a side flash and a solenoid, you have a more comfortable grip and you can push the button on the flash to fire the shutter, you don't even need bulbs.