T Grain Develop time vs Tri X

Recent Classifieds

Forum statistics

Threads
199,651
Messages
2,794,752
Members
99,983
Latest member
hypicmodapk
Recent bookmarks
0

herb

Subscriber
Joined
Jan 22, 2005
Messages
405
Format
Medium Format
I use pyrocat HD for my only film developer. I mix my own.

:rolleyes: Being in a rush the other day,

I developed two rolls of 120 in the same tank, one being TriX 320 and the other being TMY 400. The tri X came out just fine, the TMY was vastly under developed.

Time 13 min at 65F presoak 5 min, agitation 10 sec every minute. 2:2:100
dilution.

This leads me to think of Gordon Hutchin's remark that kodak was just saving silver by going to T grain films, ie. the T grain takes more to bring out the image?

Am I missing something here?
 

Roger Hicks

Member
Joined
May 17, 2006
Messages
4,895
Location
Northern Aqu
Format
35mm RF
Am I missing something here?

Probably. Less silver for a given ISO speed and covering power implies a greater surface area of silver, which would imply MORE rapid development (unless of course the emulsion were hardened more, or the other film had development accelerators incorporated, or any number of other factors except the silver content).

Cheers,

R.
 

avandesande

Subscriber
Joined
Sep 7, 2002
Messages
1,347
Location
Albuquerque, NM
Format
Med Format Digital
We hear that one many times at apug and I think it is BS. It's not like Kodak switched trix to a tgrain and didn't tell anyone.
T-grain films are different from other films... this is neither good nor bad, just another option. Kodak was always up front about the new technology and I fail to see the 'less silver conspiracy'

I
This leads me to think of Gordon Hutchin's remark that kodak was just saving silver by going to T grain films, ie. the T grain takes more to bring out the image?
 

Michael W

Member
Joined
Feb 11, 2005
Messages
1,594
Location
Sydney
Format
Multi Format
I also discovered recently that TriX 400 & Tmax 400 require different dev times.
Slightly different scenario to the original poster as this was 35mm in Xtol.

I've been doing a lot of TriX in Xtol 1:2 at 10.5 mins.
I was pleased to see that the Massive Dev Chart gave the same time for Tmax 400 so I dev'd a couple of rolls of each in the same tank.
Checked on a densitometer the TriX was spot on but the Tmax was one stop underdeveloped.
First time I've been led astray by the Massive Dev Chart. At least I now know how to do a one stop pull with TMY.

I don't think it's anything to do with less silver. TMY is excellent film, just needs more time than TriX.
 
Joined
Jan 21, 2003
Messages
15,708
Location
Switzerland
Format
Multi Format
Xtol stock
TMY EI400 box speed - 6.5m
Tri-X EI400 box speed - 7m
TMX EI100 box speed - 6-3/4m
Plus-X EI125 box speed - 5.25m
Delta 100 EI100 box speed - 8m
FP4 EI125 box speed - 8m

Times listed at Digitaltruth starting times of course, but it seems to largely depend upon the film that is used and how you use and expose it. More silver or less, who cares? As long as it looks good and you like the results....

Go figure...

- Thom
 

George Collier

Subscriber
Joined
Feb 23, 2005
Messages
1,363
Location
Richmond, VA
Format
Multi Format
My experience with Tri-x and TMax 400 is almost the same developement time with HC110, 1:45 (a dilution I kind of worked up over the years). Mostly this is 4x5 in trays continuous agitation. This is also mostly the older Tri-x. Since the new version, I have been experimenting with other developers and stand or semi-stand.
Maybe the difference or similarity in development times depends on the developer?
 

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
I use pyrocat HD for my only film developer. I mix my own.

:rolleyes: Being in a rush the other day,

I developed two rolls of 120 in the same tank, one being TriX 320 and the other being TMY 400. The tri X came out just fine, the TMY was vastly under developed.

Time 13 min at 65F presoak 5 min, agitation 10 sec every minute. 2:2:100
dilution.

This leads me to think of Gordon Hutchin's remark that kodak was just saving silver by going to T grain films, ie. the T grain takes more to bring out the image?

Am I missing something here?

Curious, my experience is entirely different. In my darkroom development times with Pyrocat-HD are shorter for TMY than TXT for the same contrast. And I have used and tested a lot of different films, including both roll and sheet.

Sandy King
 
OP
OP

herb

Subscriber
Joined
Jan 22, 2005
Messages
405
Format
Medium Format
T grain vs TXT development

Ok, it looks like I will have to get scientific.

More tests this weekend.
 

MVNelson

Member
Joined
Sep 11, 2006
Messages
5,345
Location
North Florid
Format
4x5 Format
my experience appears to be similar to Kings. In fact with the dev time and conc you quoted If the SBR was anywhere near 7 my 120 TMY probably would have been pretty well over developed
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom