Can theses lenses be interchanged either with cells only or whole shutter assemblies without major adjustments?
-
Welcome to Photrio!Registration is fast and free. Join today to unlock search, see fewer ads, and access all forum features.Click here to sign up
Swapping Planar with Xenotar lens on Rolleiflex 2.8E?
-
A
- Thread starter campy51
- Start date
Recent Classifieds
-
For Sale Hasselblad X Pan w/ 45mm/f4 Lens
- Started by eftones
-
For Sale 6 antique French pneumatic shutters _ Guerry
- Started by Manual Camera
-
For Sale Voigtländer Nokton Classic 35mm/1.4 with Leica M-mount
- Started by Klaus Mähring
-
For Sale Voigtländer Bessa R2 Special Edition Olive Green
- Started by Klaus Mähring
-
For Sale FS: Horseman Cable Release
- Started by B.S.Kumar
Forum statistics
- Joined
- Mar 23, 2005
- Messages
- 7,005
- Format
- Multi Format
Probably physically possible, but the new lens will probably not be in register with the viewing lens.. If you have the lenses and camera, do the experiment and report back.
I have a damaged 2.8E with good Xenotar and saw a 2.8E planar for sale with lens separation and thought about swapping the lenses.
You will need to adjust:
- taking lens register (distance the shutter [lens node] to the focal plane [which is different for each design])
- lens focal length (the viewing lens' focal length needs to be adjusted to match the taking lens, which is done by adjusting the separation between the front and rear group)
- calibration between the 2 lenses (so the both focus to infinity at the same time)
If you are not sure how or why you need to do these, you should probably fine someone that does.
- taking lens register (distance the shutter [lens node] to the focal plane [which is different for each design])
- lens focal length (the viewing lens' focal length needs to be adjusted to match the taking lens, which is done by adjusting the separation between the front and rear group)
- calibration between the 2 lenses (so the both focus to infinity at the same time)
If you are not sure how or why you need to do these, you should probably fine someone that does.
Swap both the taking lens and the viewing lens.
You can swap just the lens groups. The shutter is the same dimensionally, including distance front to back for lens spacing.
Be prepared to have to do some tweaks for basic shutter board distance off of focusing rails. I don't understand all the issues that cause the shims to change camera to camera. Most likely everything will be fine, but just be aware of this. All in all, there are no significant mechanical differences between a Planar and Xenotar Rolleiflex
You can swap just the lens groups. The shutter is the same dimensionally, including distance front to back for lens spacing.
Be prepared to have to do some tweaks for basic shutter board distance off of focusing rails. I don't understand all the issues that cause the shims to change camera to camera. Most likely everything will be fine, but just be aware of this. All in all, there are no significant mechanical differences between a Planar and Xenotar Rolleiflex
Contact me if you actually do make a swap. I need the leftovers, no matter the condition. I have a 3.5 E with an etched front element. And yes I agree that you should swap the entire set and keep taking and vievwng lens pairs together.
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |