super angulon 90 f8 in synchro compur 00 shutter. length??

[chris77]

hello all.
if somebody could please tell me the dimension (length) of this lens please, i have looked for this online but can only find info on the copal 0 and 1 sizes..

thanks a lot
chris

 

[Ian Grant]

Chris I think it's the same basic size/length as the 90mm f8 Super Angulon in a Compur #0 shutter, the design didn't change.

Ian

 

[chris77]

Chris I think it's the same basic size/length as the 90mm f8 Super Angulon in a Compur #0 shutter, the design didn't change.

Ian

well thanks ian.
in this case i dont understand.
should be 78mm. no spacers..
can someone confirm this?

 

[chris77]

 

[Ian Grant]

Well while the design's the same the actual barrels differ so overall length may be very slightly different but spacing of the elements maybe the same.

Ian

 

[shutterfinger]

Are you having problems with yours?

 

[Dan Fromm]

The 1963 brochure doesn't say. The '67 says that in #0 the lens is "80 mm" long.

 

[chris77]

View attachment 195517
Are you having problems with yours?

hello shutterfinger.
looks like all good. i used it ioday and found the edges very soft wide open ( havent used such a wide lens on 5x7 before, so...) stopped down all good. IT made me wonder and when i saw the schneider datasheet i was unsure. thats all (78mm mentioned mentioned there).
i guess guess its a matter of older version maybe.
tx for confirming.
kind regards,
chris

 

[chris77]

The 1963 brochure doesn't say. The '67 says that in #0 the lens is "80 mm" long.

ok. thanks dan. the datasheet on their site mentions 78mm. (for copal 0, not 00)
all is clear now.
regards.

 

[Dan Fromm]

Chris, please post the link.

 

[Craig75]

Chris, please post the link.

https://www.schneideroptics.com/inf..._format_lenses/super-angulon/data/8-90mm.html

all the main index

https://www.schneideroptics.com/info/vintage_lens_data/large_format_lenses/super-angulon/

 

[Dan Fromm]

Thanks, Craig, I know that site and have recently -- no surprise -- been there, somehow didn't see "overall length." More evidence that I need to have my vision checked.

The 78 mm dimension is, I think, for the lens in an "0+1" shutter. I believe, could be mistaken, that this is a Prontor #1 with bushings that let it accept lenses intended for a #0 Compur or Copal. Not a #00, which is what the OP originally asked about.

 

[chris77]

thanks everybody for clearing up my confusion. helpful as alwaye!