Steve Goldstein
Subscriber
I can move it to glass bottles if it makes a difference, but it'll take me quite a while to use two liters...
Thanks!
Thanks!
Well, perhaps that might be true, PE, but I have never had that particle problem because I filter very carefully. But your warning is good to have out there as a caveat. Although, at least theoretically, 'cloudy' particles might not be ABLE to be filtered, I have always managed to obtain spotless negatives after washing well. I do not know if either of us is really 'right', but your warning might be good to heed. - David Lyga
To answer several things here at one time...
Ammonium Thiosulfate solution as shipped is slightly alkaline, but Kodak and other acidic fixes are shipped on the acid side. The acidity, even with sulfite, will allow - or lead to - decomposition of Thiosulfate. This decomposition produces colloidal sulfur, the particles of which aggregate and form larger particles. The larger particles can be filtered out with a fine mesh paper filter, but the individual particles are colloidal and are so fine that they can get into the gelatin and create white dots on images. The spots are mainly seen with 35mm when enlarged, but can be seen in other formats. They are exceedingly tiny.
This is based on nearly 60 years doing this stuff. So, if you have not seen the problem, just keep going as you are, with bad hypo, and you will see it someday.
PE
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY: ![]() |
