Having difficulty with the attachment.
Heiland electronic GmbH Schulstrasse 8 D-35579 Wetzlar phone:++49 6441 26978 email:
heielec@t-online.de
New Technology for your existing enlarger
Do you want a Splitgrade system but your enlarger is
not yet supported? Are you happy with your enlarger
and don't want to change it? Maybe it's an older
condenser enlarger but still working well. Or are you
unhappy about losing the ability to print colour after
modifying a colour head to work with the Splitgrade
system?
Here is our solution: Simply replace the complete light
source of your enlarger with our brand new LED cold
light. This works independent of the existing light
characteristic, even a condenser enlarger can be
equipped with the latest modern Heiland cold light
source.
Instead of the usual neon tubes, our system uses hundreds of super bright LED´s in 3 colours
(blue, green and red) leading to several advantages like
• No light drift – stable light from the first millisecond of exposure.
• White light for focussing purposes
• Built in red light function , could be switched direct from safe light to exposure
• Insensitive to mechanical shock
• Can be adapted in size to your individual enlarger
• Emits paper safe red light to target burn in areas
With only 25% of the power consumption of traditional halogen tungsten light sources, our light
source produces an equivalent light intensity. No fan is needed.
The light falloff in the corners of the negative is eliminated with our light source. The life time of
the LED´s is several thousand hours, no replacement of LED´s is expected.
The cold light source is controlled directly by the Splitgrade controller; existing controllers can
be used by simply updating the software.
We adapt the size of the light source for your existing enlarger, at the moment we offer light
sources for
• 6x9cm negatives
• 4x5 inch negatives
• 13x18cm negatives
• 8x10 inch negatives
Other sizes could be produced on demand – please contact us.
SPLITGRADE
LED coldlight source
