Sold Schneider Super Symmar 110mm XL

[Jammoh]

I'm selling my Schneider Super Symmar 110mm XL mounted on a Linhof-style lens board. The lens has a small area of light coating damage in the center of the front lens. This was caused by the previous owner using a glass filter that rubbed against the front element. It looks worse than it actually is and I am pricing this lens accordingly.

The lens and shutter are otherwise in very good condition, with no scratches, haze, or fungus. Both lens caps.

EU sale €1400 plus shipping and fees when applicable

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[Jammoh]

€1200 weekend offer..

 

[Jammoh]

bump...

 

[Gaston 012]

I have this lens and have been using it more and more on the 8x10 than on the 4x5.
It does not cover 8x10 completely; the 4 corners get almost no light.
Despite this, I have a lot of fun and get a super wide-angle effect on 90 ot the negative and contact print it with excellent results.
I have a center filter for it that I screw on the rear element, but it really does not do that much.
I recommend it for 8x10 with the caveat of the 4 empty corners.
I also have a 250mm Kodak wide field Ektar with an ugly 4mm circle where the coating is gone.
I have tried on the 4x5, cut the negative in the center to a 35mm size, and, using this, I use a 50mm lens in the enlarger and print an 11x14 size print, and see zero distortion or marks.
Just saying!