RB67 lens shade dimensions

[philsweeney]

I'd like to ask any RB67 owners who have the lens shade to measure the dimensions of the shade especially as used for the 50mm and 90mm lenses. I made an adapter to use my series IX filters but need to construct a shade also. Length from the lens and opening dimension should be fine.

 

[Andy38]

The 50mm shade is not screwed , but I put mine firmly fixed around the barrel .
The length from the lens : about 26mm ; the width (it's a square) : about 210mm .

I haven't a 90mm lense shade ; I use the 127-250 for the 90mm lens and it's OK ; this one is screwed and circular .
The lenght from the lens : about 50mm ; the internal diameter (maxi) : about 105mm .

 

[NormanV]

50mm lens hood 210mm square!!!!!
It is actually 110mm square.

 

[Andy38]

50mm lens hood 210mm square!!!!!
It is actually 110mm square.

oh , yes , I am wrong ! I am sorry .
Thank you for the correction .
Mine is 117mm square .

 

[philsweeney]

Thanks, for taking the time to make the measurements. Is the bellows hood square or rectangler? and anyone have those dimensions?

 

[paul ron]

I have a few bellows shades in my closet if you are interested in buying one very cheap? It has the Corkin filter slots n another place to put specail effects screens up front.

 

[philsweeney]

thanks Paul but that would not allow me to use my series iX filters