Print quality after dslr scan

Laci Toth · Sep 11, 2020

gorbas said:
Laci, I'm using set up with Nikon D7000 to copy 24x36 for more than 5 years now. I'm talking from my experience. This is my set up from 3 years ago, kind of midpoint. A few things changed since. One significant thing is, I changed lens to 75mm, no practical difference in the set up. You see camera model, you see full frame on the monitor and 80mm enlarging lens on bellows, what else I need to prove to you? Back in the film days Nikon designed bellows and Negative holders to be able to do 1:1 with Micro nikkor 55mm at infinity with bellows at minimum extension and it is still valid with full frame sensor.
View attachment 250468

Sorry for the late response!
So the photos below are 750kb jpeg. That’s what I could upload, the 16bit tiff is better but the quality overall is not as good as I expected, except the last one. Based on what you’ve sent over to me which was crisp and sharp, the first two is muddy. I don’t know if it’s the camera (Nikon d3200) or the lens (Micro Nikkor 55mm f3.5) or the background light (iphone) or all of them. I’ll try with a better background light or flash and will see.

gorbas · Sep 11, 2020

Lace, are those files straight from the camera? I have no idea how "good" your negatives are? Those files do not look bad at all, but they need to be properly edited.

Print quality after dslr scan

Laci Toth

Attachments

gorbas

Privacy & Transparency

Privacy & Transparency