Post your still lifes here

[深度麻醉]

 

[深度麻醉]

 

[Sirius Glass]

View attachment 310627

All of your work is very good.

Welcome to APUG Photrio!!​

 

[Nokton48]

18x24 Mammo Shortie Sawed Off Norma by Nokton48, on Flickr

This is a test shot (my Shorty Norma) French Kodak 18x24cm Mammo Film, processed in D23 1:1. Taking camera is my new Annie/Avedon inspired 8x10 Norma. I applied 30 degrees of front and rear swing, the Norma original recessed lensboard is sharp all the way across the field. I like how the DOF drops off with the 360mm f5.6 Norma Symmar. There appears to be highlight blooming, which I find kind of attractive. Best thing about this film was that it was not at all expensive. And I have a lot of it

My "Shorty Sawed-Off Norma" has a basic rail cut down, to just accomodate a 120mm lens. Here it is shown with the 47mm f8 Super Angulon, which I am looking forward to using a lot with 2x3 and 6x9. This is not a telephoto camera, but I can easily lift and carry it with one hand without strain. The lowly Star-D tripod is sturdy enough with this setup, given proper time to settle down. I cut both ends off a basic Norma rail with my Lil Machine Shop Bandsaw. So it is now simply a hollow tube perfect length for Field and Architecture.

SONY DSC by Nokton48, on Flickr

And this is the camera that took the above photo. My 8x10 Norma Back Field Front

 

[深度麻醉]

All of your work is very good.

Welcome to APUG Photrio!!​

Thank

 

[Sirius Glass]

I like photographing shells too.
Shooting black & white and then coloring them is a favorite past time.
Shot with Hasselblad 501CM, CFi 120/4, & Kodak Tri-X.
I used the A16 back to save on film.
The negative was photographed on a light box, so its aspect ratio is warped.

A Hasselblad owner and user, obviously a very wise person. Kudos.

 

[深度麻醉]

I like photographing shells too.
Shooting black & white and then coloring them is a favorite past time.
Shot with Hasselblad 501CM, CFi 120/4, & Kodak Tri-X.
I used the A16 back to save on film.
The negative was photographed on a light box, so its aspect ratio is warped.

You take a very beautiful picture.
My shell is made with Dearorff 8X10, Kodak wide field Ektar f6.3 10in, lucky flim (made in China film)

 

[深度麻醉]

Your work is excellent!!
Wish I had a Deardoff. I have a Sinar and a Linhof 4x5.
8x10 is too large for me, had a 5x7 Wisner and did not like it.
Best to you!

LOL!
We are all film enthusiasts.
Best to you!

 

[qqphot]

Old Bell and Howell photographed with a Leica IIIf & Nooky-Hesum adapter with 50mm Summitar.

 

[Philippe-Georges]

Nectarines

Hasselblad 500 C/M + S-Planar 120mm + dark orange filter on Tri-X 400ASA in window light, processed in E-76 1+1, and printed on FomaBrom FB so that the red and the wood parties, which are bleaker due to the filter, are rendered darker than 'normal' (what pulls the blue of the dish too).

 

[Santiago Ignacio]

Shot on a Texas county road. Olympus XA at F11, Fomapan 100, Rodinal 1:100

 

[Sirius Glass]

Shot on a Texas county road. Olympus XA at F11, Fomapan 100, Rodinal 1:100

View attachment 339390

Welcome to APUG Photrio!!​

 

[Brad Deputy]

I liked this one, just scanned today. Snapped 5/7 in my backyard
Apple Tree Blossom (Cosmic Crisp!)
Olympus OM4ti on Fuji 100 (Japan), 50mm F3.5 Macro
Developed with Unicolor 1L C-41 Press Kit

 

[Nokton48]

Adox Ortho PL25 5x7 Norma MicX 360 Apo Ronar by Nokton48, on Flickr

5x7 Sinar Norma #2 360mm F9 Rodenstock Apo Ronar barrel at F11 Adox 5x7 Ortho PL25 Yellow filter Broncolor C200 1500WS Monolight popped eight times into Broncolor Octobox 150 with supplemental diffusion. 4x6 foot foamcore fill right just out of the frame. Legacy Mic-X straight replenished mixed in 2019. 5x7 Contact Print on Arista RC #2 Dektol 1:2 . I shot one frame at four pops, and one at eight pops. The denser neg looks better to me. Canvas background is "Tim Kelly Gold Plaster" painted for me by Artist David Maheu.

 

[Nokton48]

Petzval type unmarked brass projection lens Makiflex No iris by Nokton48, on Flickr

Unmarked Petzval type beautiful brass Projection Lens vintage late 1800's? Central stop removed, very swirly beautiful bokeh. I'd guess 200mm focal length, I wanted speed and I'd guess about F3.5 wide open. Sharpest in the center, central bouquets were focused on and are sharp! Depth of Field is near nil. Orwo NP22 9x12cm I bought in bulk from Bulgaria. Voigtlander Makiflex Plate Holder pretty good match. RADA made plates from Plaubel and were hooked up with them for a good while. These tend to light leak and I'd retrapped a lot of plate holders, could maybe be improved? I also have some French and Russian Plate holders that seem to work as well. Yes it is sharp in the center only, that was my intention. Removing the central interior stop increased the swirly bokeh, and increased speed to about F3.5 or so. The central stop was blackened by a candle, the black soot got all over my fingers. NP22 developed in straight Legacy Mic-X Replenished. A Deep Tank Developer that lasts for many many years

[

 

[Minox]

Nikon FM3A, Rollei Retro 80s at the Technik Museum in Sinsheim, Germany. Processed in Rodinal Spezial and scanned.

 

[Nokton48]

Makiflex 4x5 Shanghai Octobox 150 F16 D23 by Nokton48, on Flickr

9x9cm image 9x12cm film Plaubel Makiflex F16. Shanghai 100 film with YG filter D23 1:1 Unidrum Uniroller Omega DII laser aligned 150mm black Rodagon at F16 Arista RC #2 8x10 Dektol 1:2 Testing the new to me Broncolor Octobox 150, beautiful light like movable window lighting. Supplemental Octobox 150 Diffuser added. Notice the attractive catchlight in the glass vase. 4x6ft foamcore panel just off camera right for passive fill. Canvas background painted by James Bright. 1500J Broncolor C200 Monolight gets me to F16 one pop with filtered 100 film.

 

[Nokton48]

Peco Jr Long Rail 150mm Apo Ronar PanF D23 80x80 Pulsoflex Makina Back by Nokton48, on Flickr

Here I am testing my new to me 150mm F9 Rodenstock Apo-Ronar, a tiny Process Dialyte of good repute. Attached to my long rail Peco Junior Mini-Me View Camera, with Adjustable Viewer and Plaubel Makina 6x9cm Roll Back. Yellow Filter Pan F+ D23 1:1 JOBO Uniroller Omega DII laser aligned, 8x10 Arista RC #2 Dektol 1:2 . 80x80cm Broncolor C171 Pulsoflex Softbox camera left, 4x6 foam core sheet just off camera right. Low Key Background by James Bright

 

[Milpool]

 

[Nokton48]

Auto Makiflex 150 Xenar ERA 100 EI 50 ADOX BORAX MQ by Nokton48, on Flickr

Plaubel Automatic Makiflex 150mm f4.5 Plaubel Makiflex Auto Xenar 1/30 F11 StarD tripod 4x5 ERA100 film ADOX BORAX MQ Arista RC #2 Multigrade developer

The Xenar has a pleasing look and I am stoked to have it. I have not used it much at all.

 

[pentaxpete]

Decanter : Pentax 6x7 Mk I , Bowens flash, 1999 dated FUJI ASTIA 220 size

 

[Tombadil]

Unha cunca: Ricoh KR10M Sigma 35-70mm Hilford hp5

 

[GregY]

Rolleiflex, Pan F, print on Foma Variant lll

 

[GregY]

Leica M4, 35mm, Tri-X, print on Ilford WT FB

 

[Nokton48]

C22 No 2 135mm New Leitz Tiltall Hacked Leitz Ball Head by Nokton48, on Flickr

Mamiya C22 Body #2 with 135mm Blue Dot Yellow Filters Paramender. Mounted on new to me Leitz Tiltall heavily modified. Regular column replaced with modern black one with Leitz Ball Head neatly permanently attached. This new Ball Head (same as on my Leitz Tabletop Tripod) works great on the original Tiltall and a Japanese Quick Mount, which also works great with the Paramender. This weighs little enough that I can carry it around with one hand without straining. And it is rock solid Leica Quality. Broncolor Octobox 150 left, 4x6 foamcore right. Sony Nex-7 with Zeiss Touit Makro Planar 2.8/50. Painted background by David Maheu "Tiim Kelly Gold Plaster".