Noblex 6/150 U

OP
OP

sanking

Member
Joined
Mar 26, 2003
Messages
5,437
Location
Greenville,
Format
Large Format
Image made with Noblex 150U. Añisclo Canyon in Ordesa National Park, Pyrenees in Aragón. Ilford XP2 film, one second at f/22.

The actual distance from the far left side of this image to the far right side is about 100 yards. The camera is about two meters from the center tree, which is a very large beech.

Sandy King
 

Attachments

  • 1-Anisco.jpg
    783.5 KB · Views: 443

europanorama

Member
Joined
Aug 10, 2004
Messages
381
Location
Basel-CH
Format
Large Format Pan
I have a previous model with a fixed focus (Docter Optics) lens. The camera has always worked flawlessly and the lens is incredibly sharp and wonderful. I too would be interested in filters, etc.

noblex canada has such lenses. are they still around?
 

europanorama

Member
Joined
Aug 10, 2004
Messages
381
Location
Basel-CH
Format
Large Format Pan

the newer or newest model did have a short-rotation-mechanisme. not turning around every time. pls could someone knowing this explain.
 

europanorama

Member
Joined
Aug 10, 2004
Messages
381
Location
Basel-CH
Format
Large Format Pan
docter
 

ufpd

Member
Joined
Oct 12, 2008
Messages
5
Format
Medium Format
Hi!

I am testing a 6/150ux and I am very happy with the initial results. The first b&w roll worked flawesly.
The user manual has a typo, 5 for S so I got confused and missloading the camera and lost one frame in the second roll
But when I developed the Provia 100 roll I found the camera oversized the space between frames. And I got 2 unexposed frames (one in each roll)
Then I loaded a ruined film and check the film position after load and after the last frame and It seems to work ok.
Can the bad loading be the problem with the space between frames?
Any tip will be greatly apreciated, sorry about my english

Alejandro
www.gulminelli.com
Buenos Aires, Argentina
 

Attachments

  • 1.jpg
    441.7 KB · Views: 244
Last edited by a moderator:

David A. Goldfarb

Moderator
Moderator
Joined
Sep 7, 2002
Messages
19,974
Location
Honolulu, HI
Format
Large Format
Unless there is something wrong with the film advance, spacing problems or missing frames are likely to be the result of loading error.

When you load the camera, the large arrows on the film backing should line up with the red dot inside the camera, and the counter should be on "S". Then close the back, and advance to "1".

Do not push the shutter button to advance the counter past "S" until you close the back. If you do, you need to advance the counter all the way around back to "S" before loading the film and closing the back.
 

mfohl

Subscriber
Joined
Jan 10, 2007
Messages
1,189
Location
Westerville,
Format
Multi Format
Hi Sandy, I have a Noblex 150; don't think it's a U model because the slow shutter speed module doesn't fit. Anyway, it has the sharpest and contrastiest lens that I own, better than the 35mm Nikkors and Mamiya TLR lenses. It is extremely sharp. My exposures are all right on. I do mostly sunny 16 stuff, and in lower light situations I meter with my 35 Nikkor and set accordingly.

It does have some mechanical issues. If you don't follow the film loading instructions to a T, you may have overlapping images. And now I get overlapping images sometimes when I do follow the instructions. So I'm going to send away for service. And even with overlapping images, sometimes the negatives are usable.

You should be able to find filters on ebay. And there was a guy in Holland who made them; can't remember his name.

The camera will take some getting used to, as it is extremely panoramic. Tilt the camera up or down slightly, and close (5-10 meters) horizontal lines bend in the middle. And that's not necessarily a bad thing, but be aware that it's there.

I've had fun with mine, although it is not my primary camera. I do know a couple of other folks who use it more than I do, and they do very nice work.

Good luck, and have fun.

-- Mark
 
Cookies are required to use this site. You must accept them to continue using the site. Learn more…