Nikon F2 and DP-1 Photomic Meter Repair
-
A
- Thread starter ic-racer
- Start date
Recent Classifieds
-
For Sale FS: Wista 45VX Metal Field Camera & Wide Angle Bellows Type II
- Started by B.S.Kumar
-
Want to Buy Pocket Wizard
- Started by aconbere
-
For Sale Ilford 4x6 Post Card Paper
- Started by Rick A
-
Want to Buy WTB Olympus MotorDrive 2 with Control Pack and Charger
- Started by nbagno
-
Want to Buy WTB - Canon 110ED
- Started by cptrios
Forum statistics
I did not go into detail about the re-painting. What I did was to do the black in lacquer and after it was dry I did the white letters in enamel. That way I could fill in the letters with a little overflow of white and wipe with paint thinner. The paint thinner does not harm the lacquer. After that there was just a little haze and that was removed with some rubbing compound.
Last edited:
The second F2 arrived.
This one is the F2A, which is an F2 body with DP-11 finder. It is from 1978 based on the serial number. Looks pretty well preserved. Even came with original vintage Nikon branded strap.
The camera had never been opened. It even still had the dab of laquer on the locking screws for the shutter tensioners.
The DP-11 finder is pretty much identical the the DP-1 I just repaired, except the mechanical element on the front interacts with the AI groove on the lens, rather than the metal ears.
Since the DP-11 system does away with 'indexing' the lens for its fastest aperture, another means of showing the aperture in the viewfinder was needed. In this case a little prism system allows one to see the tiny f-stop numbers near the rim of the aperture ring.
Is this really better than the other system? We will see. (or maybe NOT SEE, as the aperture numbers can be pretty dim).
This one is the F2A, which is an F2 body with DP-11 finder. It is from 1978 based on the serial number. Looks pretty well preserved. Even came with original vintage Nikon branded strap.
The camera had never been opened. It even still had the dab of laquer on the locking screws for the shutter tensioners.
The DP-11 finder is pretty much identical the the DP-1 I just repaired, except the mechanical element on the front interacts with the AI groove on the lens, rather than the metal ears.
Since the DP-11 system does away with 'indexing' the lens for its fastest aperture, another means of showing the aperture in the viewfinder was needed. In this case a little prism system allows one to see the tiny f-stop numbers near the rim of the aperture ring.
Is this really better than the other system? We will see. (or maybe NOT SEE, as the aperture numbers can be pretty dim).
Last edited:
So far I have decided to keep my Non-AI lenses Non-AI and not file the notch in the aperture ring.
Just the way the shutter tensioners are implemented makes F2 a top mechanical camera in my book. So many neat features I have known about when they first came out. Plus I'm finding out new things that were not clear to me in the 1970s. For example the winding gears are disengaged from the curtains when the curtains move. One way they got the curtains to speed up, almost twice the speed of the "F."
Just the way the shutter tensioners are implemented makes F2 a top mechanical camera in my book. So many neat features I have known about when they first came out. Plus I'm finding out new things that were not clear to me in the 1970s. For example the winding gears are disengaged from the curtains when the curtains move. One way they got the curtains to speed up, almost twice the speed of the "F."
"for durability under extreme conditions. A number of Nikon F2's rode in Evel Knievel's X-1 Skycycle when he attempted to jump Snake River Canyon. The motor drives kept clicking and taking pictures all the way down to the bottom when he crashed, and each camera was fully functional, if pretty beat up, after being removed from the 'bike.'"
Nikon advertising
But we experienced these camera generations ourselves when they were new in the shop windows of the camera dealers. We were witnesses to the times and have first-hand experience.
That gives us an advantage over those born later
But we experienced these camera generations ourselves when they were new in the shop windows of the camera dealers. We were witnesses to the times and have first-hand experience.
That gives us an advantage over those born later
Yes. In fact the F2 is nostalgic for me. It was in 1973 I held one in my hands on the counter of the camera store. I also tried the OM-1. At the time I thought the Nikon was clumsy and not designed as well as the OM-1. I got the OM-1 and never came back to the F2 until now.
I still have the same OM-1 I got back in 1973 Here it is, all cleaned up, foam removed from the prism and calibrated for zinc cells.
The camera was listed as 'non-functional' as it had a somewhat severe dent in the back and it would not open (for the seller). Obviously I got it open.
It was not too hard to straighten out the dent. In fact the metal is very soft; it is easy to overdo it.
It was not too hard to straighten out the dent. In fact the metal is very soft; it is easy to overdo it.
It did clean up nice in the end. I was expecting it to, as I paid twice as much for this one.
The serial number dates it to 1977.
Everything works as it should. It has never been opened from what I can tell, based on the lacqer still on the adjustment screws for the shutter.
I did not need to even open the DP-12 as it was still in calibration. Same with the curtain speeds. No tweaking needed.
The serial number dates it to 1977.
Everything works as it should. It has never been opened from what I can tell, based on the lacqer still on the adjustment screws for the shutter.
I did not need to even open the DP-12 as it was still in calibration. Same with the curtain speeds. No tweaking needed.
A little off-topic, sorry. But I have a Nikormat FT3. The meter is intermittent. Fixable?
Great work and I'm enjoying seeing the service on these!
Now you need a DP-2 and DP-3 to round out the set! I think DP-3(F2SB) is my favorite of the bunch since it has all the advantage of full meter coupling with non-AI lenses. To me it's far more versatile since most most manual focus AI lenses have the coupling shoe present, and I've even added shoes to a few AF lenses.
Now you need a DP-2 and DP-3 to round out the set! I think DP-3(F2SB) is my favorite of the bunch since it has all the advantage of full meter coupling with non-AI lenses. To me it's far more versatile since most most manual focus AI lenses have the coupling shoe present, and I've even added shoes to a few AF lenses.
Yes, DP-3 looks nice. One issue I have with DP-12 is not being able to see the aperture numbers. Also, in my own assortment of lenses, most do have the ears. Even without the ears, stop down metering with illuminated LED is not too bad (expecially compared to Rolleil SL35, where the meter needle becomes almost invisible after f11 
)
)
Last edited:
| Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here. |
PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:  |