Mistery flowmarks on C41 negatives from dip and dunk

[John Salim]

Hi John, thank you for the message.

Cycle is 3s ON, 7s OFF. There is also a 1s pre-agitation setting that happens just before the rack lands.
The machine does not burst while transporting but I guess the pre-agitation happens at the very last moment of the lift movement if that's what you mean.

E

Hi E,
Well that all sounds fine to me, though 3" seems a little long and 7" sounds short ( but not critical )
The developer solution should rise about an inch during burst.

John S