Kodak C41 2.5/5L kit and Fujihunt 5L kit - from a Bellini 1L user

[koraks]

When getting the developer up to development temperature, do you just put the bag in the water bath as-is

Why would you heat the entire bag? Just drain the required amount of developer into a bottle and put that in a water bath. A lot more convenient than having to handle a wet, floppy bag and having to wait for potentially several liters of developer to come to temperature when you only need a few hundred ml.

 

[sperho]

Why would you heat the entire bag? Just drain the required amount of developer into a bottle and put that in a water bath. A lot more convenient than having to handle a wet, floppy bag and having to wait for potentially several liters of developer to come to temperature when you only need a few hundred ml.

My understanding was that the OP uses 1 L bags and 1 L development tanks, so he'd need to put the whole bag in the bath. I was curious how that worked. I usually use a 2 reel tank and I would do exactly as you suggest: heat what I need.

 

[koraks]

Thanks for clarifying, that makes good sense!

I never warmed up (hehe) to the wine bags.

 

[sperho]

Thanks for clarifying, that makes good sense!

I never warmed up (hehe) to the wine bags.

You're welcome. I'm pretty new to trying to handle chemicals at home (other than 1-shot b/w stuff) that have lifetimes short enough to have a real impact on the economy of their usage. When I handle chemicals at work, it's using proper laboratory equipment (I'm an analytical chemist). Despite some chaff, there is a lot of "wheat" tips in these forums! Thank you for your many useful contributions as well...

 

[ChrisGalway]

Sorry missed that question. Once I mix all the chemicals for the entire 5L kit, I separate them into 4x 1L light-tight air-tight wine bags, and 2x 0.5L wine bags.

My regime is like this for the 1L working solution:

- Use Paterson 1L tank (3x 135 or 2x 120 rolls)
- Use full 1L chemical
- Time compensation for color developer (in minutes): 3:15 for rolls 1-4, 3:30 for 5-8, 3:45 for 9-12, 4:00 for 13-16
- I did not bother to compensate for bleach and fixer
- Pour 1L chemical back to the wine bag, squeeze out air and foam, cap

And repeat the above for next few rolls. As I said I use up 5L over about 11 months, so use up 1L every 2 months or so.

Could you please give a link to the wine bags you use? (I'm in the EU, but hopefully will be able to find the ones you use somewhere.)

 

[koraks]

Could you please give a link to the wine bags you use?

bag ALU for BAG in BOX 3 l wine

Order bag ALU for BAG in BOX 3 l wine from Brouwland. Create your own flavour, we'll help you on your way!

brouwland.com

Also comes in 5L and 10L sizes. They also sell boxes that envelop the bags precisely.

Despite some chaff, there is a lot of "wheat" tips in these forums! Thank you for your many useful contributions as well...

Much appreciated!
Your input from your professional background would certainly also be highly appreciated on the forum; please don't hesitate to comment whenever you run into some 'chaff'!

 

[blee1996]

Mine looks like this, they can stand up on their own.

And the Amazon link:

Amazon.com

 

[sperho]

That's a nice design. The bags I purchased will not be as convenient. I'll figure something out though... The ones I ordered are this style:

 

[ChrisGalway]

Mine looks like this, they can stand up on their own.

View attachment 415731

And the Amazon link:

Amazon.com

Thanks, they look more practical!

 

[sperho]

Thanks, they look more practical!

Yes, if one is going to put the whole bag in the bath, these look great. I plan to dispense what I need into a PET bottle, so I won't have to worry about the lack of support that the bags I shared will (or more appropriately, will not) provide...