Jon Goodman Light Seal Kits

[Shawn Dougherty]

I've searched/read through many threads and want to buy a RB67 Pro S and 120 back light seal kit from Jon. Sent him an e-mail from an address I found in search here but haven't heard back, wondering if it was even the right address?

I used - jon_goodman at yahoo.com

Can anyone confirm his current e-mail address or which fellow he is for sure on fleabay?

The info is scattered through all sorts of threads, thought one specifically about his kits might be in order.

Thanks in advance. Shawn

 

[Dan Daniel]

In responding to a recent question I sent him, he replied using the following address:

JGood21967@aol.com

On ebay, search for 'interslice'

 

[Shawn Dougherty]

Thanks, Dan!!!!!!!!

 

[DLM]

I looked and that's the email address I have in my Gmail acct for him. His kits are great. He used my Minolta Autocord back to measure for a kit to sell, so I got those seals replaced, and I also bought kits for my Mamiya M645 and Olympus XA.

 

[Curt]

I've purchased two kits from him and they are complete and very well made, I don't know of anyone who provides such a great product. I encourage anyone one who thinks they need to replace the seals on photo equipment to contact Jon and get a kit.

Curt

 

[Dan Daniel]

Hey DLM- thanks for loaning him the 'Cord! That's what I emailed him about recently, a kit for the Autocord, and he wrote back saying that he had just finished developing it.

Yeah, highly recommended. He's been at it for a long. One of the good people. And someone on ebay has been ripping him off; selling kits with 'instructions included!' as part of the description. The 'instructions' are copies of Jon Goodman's instructions. He says that ebay could care less.....

 

[ShaunQ]

I contacted him recently and he emailed back the next day, great to know someone like him cares about his customers so much, just waiting for him to release a light seal kit for the RZ67 now, come on Jon!

 

[Shawn Dougherty]

Thanks fellows, I was able to get in touch with Jon and get a total for my order. Very responsive fellow. Now I just need to lay off the coffee until I get this done =)

 

[danegermouse]

another vote for Jon as one the great blokes selling stuff on the interweb. i bought one of his his uncut kits a few years back and have replaced a few seals on my canon fd bodies as well as my rb67 with 2 120 backs. his instructions are very precise and I am not even half way through the foam. he was very responsive and posted the kit to australia in not time at all. if i didn't have so much of the original kit left over i would be doing business with him again.

dane.

 

[srs5694]

I believe that Jon Goodman sells on eBay as "interslice," so you can search that way, too. I just checked, and at the very least there is an eBay seller called "interslice" who's selling camera seal kits. (I realize this information is too late for Shawn, but it might be useful for others.)

 

[MFstooges]

His last name says it all. Customer service is top notch and the kit is very well made. It's not expensive so buy two! just in case

 

[Shawn Dougherty]

Received and installed my light seal kit for the RB67. I replaced everything - mirror box, RB (both sides) and the 120 back. Will take it out after work to test it. Fingers crossed!

BTW, service was quick and friendly and the instructions were top notch.

 

[pacman1213]

I bought a Kit for my M645 1000s a few months back and he was very quick to send the kit. Also, his prices are very reasonable.

The kit is great, all pieces are pre cut and ready. Instructions are included and they are very detailed and easy to read.

I highly recommend getting a light Seal Kit from him!

 

[NormanV]

I bought an uncut set of foam from him a year or so ago. He emailed shortly afterwards to check everything was ok. I call that service and for only a $10 sale!

 

[Paul Armstrong]

When were your inquires/transactions sent? I've sent 2 e-mails following these glowing references to inquire about Hassy kits or foam and not received any reply. Is he still in business? What contact info are you using?

 

[danegermouse]

try contacting through "interslice" at ebay. "contact seller" link should get you in contact with him and he will either do business there or redirect to an active email account. i have heard that some people have used different email addresses for him so this might be your best bet.

dane.

 

[dnk512]

Another perfect experience with Jon here, too!

 

[Mike Wilde]

I bought three kits 2 weeks ago, off of Interslice on ebay, and they arrived 3 days ago. Two of the three are installed already. The last one will be done once that camera has it's current roll finished.

As others have said. Good materials, excellent instructions, perfect fit.

I have about 5 or 6 other cameras that need the same treatment, and now I am sure I have located the right source for their needs.

 

[Shawn Dougherty]

I just bought a couple more light seal kits from Jon Goodman, this time for 35mm cameras. Excellent service, quality product, perfect instructions. A great guy and resource for APUG. I reached him through e-mail JGood21967 "at" aol "dot" com.

 

[Ken Nadvornick]

I just bought a couple more light seal kits from Jon Goodman, this time for 35mm cameras. Excellent service, quality product, perfect instructions. A great guy and resource for APUG. I reached him through e-mail JGood21967 "at" aol "dot" com.

I'm quick to second that. Several months ago I replaced the seals on a Mamiya C330S. The kit was precision cut to the exact dimensions. The instructions were on point and easy to visualize. Delivery was extraordinarily prompt.

Plus something else not always considered, the foam type itself, selected by Jon, is a great match. Very resilient, mine has yet to show any memory effects. When I open the camera back the foam still fully expands and looks like it was installed yesterday. And equally as important, no VOCs to outgas and fog the inner lens surfaces and film compartment.

Highly recommended product...



Ken

 

[GRHazelton]

Jon Goodman is truly A Good Man

Jon Goodman exemplifies his name. I contacted him for seals for my OM-4 and he sent the seals before I sent him the check! This trust and faith in one's fellow humans is so refreshing in this cynical age.

I believe he quit selling on FleaBay at one point at least, because some low-lifes were poaching his excellent instructions for their sorry rip-off kits.

 

[removed account4]

while i haven't bought jon's seals, when he was regularly selling things here in the classifides here
i bought a watch from him, and i wear it all the time. its a mechanical gem sent to me for less than
the price of the wristband i put on it. the jeweler asked where i got the watch and how much i paid
and he was in utter disbelief. as grhazelton states jon exemplifies his name and he a good man !

 

[Adam W]

Jon Goodman exemplifies his name. I contacted him for seals for my OM-4 and he sent the seals before I sent him the check! This trust and faith in one's fellow humans is so refreshing in this cynical age.

I believe he quit selling on FleaBay at one point at least, because some low-lifes were poaching his excellent instructions for their sorry rip-off kits.

I can top that! He sent me the seals and insisted I not pay at all.

 

[Brett Rogers]

When I happened to mention in passing that I needed to track down a spare prism in order to get an early Contaflex going, Jon was kind enough to send it to me free of charge for the cost of postage. And he threw in a spare focus screen he had as well. I've never bought any seals etc. from him: he's just a really nice guy. I'd recommend him to anyone.

 

[one90guy]

I have been using his light seal kits since 2008, always quick service, excellent instructions, and cut widths are prefect fits. My only connection with Jon is a happy customer.

David