I want A Hasselblad. Talk Me Out Of It!

[Andrew O'Neill]

I could always just bring the SX-70, but I don't have any film, nor does my local shop have any...

 

[BrianShaw]

I could always just bring the SX-70, but I don't have any film, nor does my local shop have any...

Naughty boy. Wash your mind out with soap.

 

[Andrew O'Neill]

Naughty boy. Wash your mind out with soap.

Thanks! I needed that!

 

[mshchem]

One time a day use your phone with the intent to make a digital negative for a carbon print when you get home. Maybe a portrait of your lovely wife.
Just recharge yourself and enjoy the amazing coffee. Cigars are silly, they smell wonderful as long as I don't have to smoke one. Maybe light some as incense

 

[Andrew O'Neill]

I won't go near a cigar since and friend of mine back in high school let me try one, and it blew up. True story.

 

[mshchem]

I won't go near a cigar since and friend of mine back in high school let me try one, and it blew up. True story.

Good call, waste of time and money! I remember those loaded cigarettes!

 

[GregY]

A house full of cameras and a trip to Cuba without just one.....got to be a crime....

 

[Andrew O'Neill]

In grade 10, I got him with itching powder. Gotch drawer. He was pretty squirmy the following day, in class....heh heh heh.

 

[Michael Mutmansky]

In another thread, Ralph mentioned the use of a special tool used to cock the shutter if it's been fired but the body hasn't. I googled it and it's called a FotodioX CameraKey. How many of you have one of these, or do you make due with a coin. The owner of the kit I'm interested in, just used a coin.

I have one, but I don't think it is the Fotodiox version... there's others who make this.

Anyway, I wouldn't get one if it were just for the lenses as a coin would suffice (but in fact these days, there's a good chance I wouldn't have any coins on me). However, if the body jams, you need to get into the cocking mechanism from the back side under the mirror and up to the front of the body and a coin won't work in this situation, The other end of the tool is designed for that.

I've not needed to use it for that purpose so far, but I have it just in case. It does work well for the lens cocking, too. I find very rarely, a lens gets jostled and the shutter must trip, so I (very rarely) occasionally need to re-cock the shutter on a lens. It's good to have the too for that and also to be aware that this occurs so if you find trouble when switching lenses, to be aware and check this before any attempts to use muscle on anything.

 

[Pieter12]

One time a day use your phone with the intent to make a digital negative for a carbon print when you get home. Maybe a portrait of your lovely wife.
Just recharge yourself and enjoy the amazing coffee. Cigars are silly, they smell wonderful as long as I don't have to smoke one. Maybe light some as incense

Cigars are not silly. They are deadly serious.

 

[john_s]

If it makes you feel better, you are not alone.

Yesterday,I began printing the snow pictures from earlier this week and my 25+ year old Zone VI VC cold light head died - well the yellow light did. Replacement parts are nonexistent so I wrote a rather painful cheque to Catlabs for a new Heiland LED VC head.

I had planned to get one eventually and was sort of saving for it but one day of printing with the original Omega condenser and above the glass Ilford filters was so maddening, slow and error prone, I gave in an ordered the new head.

I guess I don't really need to eat this month.

Grrrrr.

(Have a nice trip).

This will deserve a new thread, but I will be very interested to read how you like the (rather expensive) Heiland setup. As matter of (off-topic) interest, which controller did you choose?

 

[john_s]

Czech, Cheque, Check

Is English the goofiess language or is it just me?. I think I gave up on "the language arts" around 3rd grade. Something that is apparent to all. Arts and Sciences, that's my lane!

Years ago, Australian tennis player Pat Cash defeated Ivan Lendl in a notable match and the newspaper headline was "Cash is better than a Czech."

 

[jeffreyg]

Andrew: I've never been to Cuba but I live in Miami and have enjoyed much of the culture and the company of Cuban born friends. Some years ago one who was a top notch photographer, Mario Algaze, had me print a limited edition series of four of his favorite images in pt/pd/au. Another friend, Carl Juste who is a top photojournalist did a series Havana and Haiti that I hope will be published as a book. As much as you claim to not be taking a camera you should at least take a point and shoot. You will be kicking yourself for not taking one. If nothing else try Havana Club rum it will be worth the trip and perhaps drown your sorrow for leaving a camera at home.

 

[Pieter12]

Andrew: I've never been to Cuba but I live in Miami and have enjoyed much of the culture and the company of Cuban born friends. Some years ago one who was a top notch photographer, Mario Algaze, had me print a limited edition series of four of his favorite images in pt/pd/au. Another friend, Carl Juste who is a top photojournalist did a series Havana and Haiti that I hope will be published as a book. As much as you claim to not be taking a camera you should at least take a point and shoot. You will be kicking yourself for not taking one. If nothing else try Havana Club rum it will be worth the trip and perhaps drown your sorrow for leaving a camera at home.

Maybe Andrew has been there before. It is a favorite destination for Canadians.

 

[Andrew O'Neill]

Nope. Never been. I think Mexico is more of a favourite for Canadians... never been there, either.

 

[chuckroast]

This will deserve a new thread, but I will be very interested to read how you like the (rather expensive) Heiland setup. As matter of (off-topic) interest, which controller did you choose?

The basic

This will deserve a new thread, but I will be very interested to read how you like the (rather expensive) Heiland setup. As matter of (off-topic) interest, which controller did you choose?

Discussion moved here:

Heiland LED Head As A Replacement For Legacy Cold Light Heads

An OT discussion began to emerge on another thread about the Heiland LED enlarging heads, so I thought I start it as a discussion in it's own right. Backstory My 25+ year old Zone VI VC Cold Light died of old age - well the soft light tube did, I guess. No parts available anywhere. The...

www.photrio.com

 

[chuckroast]

Once you get it all set up, and have made a few prints, I'd love to hear your take on it.
Side note: Thank you for spelling cheque correctly!

When my cheque clears, I will check back with you and share my experiences here ... eh:

Heiland LED Head As A Replacement For Legacy Cold Light Heads

An OT discussion began to emerge on another thread about the Heiland LED enlarging heads, so I thought I start it as a discussion in it's own right. Backstory My 25+ year old Zone VI VC Cold Light died of old age - well the soft light tube did, I guess. No parts available anywhere. The...

www.photrio.com

 

[tcolgate]

Nope. Never been. I think Mexico is more of a favourite for Canadians... never been there, either.

We went to Cuna about 15 years ago. It's a beautiful country, especially the mountains on the west side. After 10 days travelling around the excesses of the all-inclusive on the north side were pretty distressing. (it was a package tour,). Such a warm and exhilarating people that was having a rough time (I think still is,)
Indulge in Cuban culture, butt put aside the "traditional western view" of it. Hemingway and old cars is our version of Cuba, not theirs.

 

[MattKing]

I think Cuba is a bit more popular as a destination for Canadians in the eastern parts of the country.
Not surprisingly, given the distances involved.
Toronto being approximately 2200 km by air from Havana and in the same time zone.
Compare that to where Andrew and I are - Vancouver being approximately 4600 km by air from Havana and three time zones away.
Interestingly, the distance between Toronto and Vancouver is approximately 3400 km by air.

 

[Andrew O'Neill]

That makes sense.

 

[chuckroast]

Speaking of Hasselblads. I just checked with Jim Holman at ICT. He does complete teardowns and CLAs on them for around $350-ish plus parts. He's guessing turnaround times of about 1 month.

I was super happy with how he redid my Nikon F Apollo FtN, I am likely to have him do my 25 year old 501C/M next.

 

[MattKing]

That makes sense.

@Andrew O'Neill - due to my copy and paste error, the number for the distance between Vancouver and Havana got messed up. I've corrected my post to indicate that the distance id approximately 4600 km.

 

[Mike Lopez]

@Andrew O'Neill - due to my copy and paste error, the number for the distance between Vancouver and Havana got messed up. I've corrected my post to indicate that the distance id approximately 4600 km.

Still a few more corrections to make in that post…

 

[MattKing]

Still a few more corrections to make in that post…

Indeed - it should be okay now!

 

[mshchem]

So if you're flying 4600 km, at 450 knots into a 30mph (statute) head wind, with a fuel burn of 21 kg/100 miles at 21,000 feet MSL, 19,032 above AGL where can you eat for $200 USD, before 16:30 UTC? Current exchange rate 17.3 CUP to 1 CAD. Remember to act Canadian if you want to get by without tipping so to stand in solidarity with your fellow Americano Norte' against the Yankee Imperialists!

Like photography class, show your work.