I want A Hasselblad. Talk Me Out Of It!

[Pieter12]

I agree, the 40 FLE is amazing. But it is a challenge to use well, and I know I have not mastered it:

https://worldofdecay.blogspot.com/2024/07/danger-gas-and-review-of-zeiss-40mm-4.html?m=1

The Schneider 40mm f/3.5 for the Rollei 6008/Hy6 is pretty sweet too, and smaller and lighter.

 

[Andrew O'Neill]

Isn't your RB67 an SLR?

It is, but it's not 6x6...

 

[djdister]

I had a Hasselblad 500 c/m with the 50, 80 and 150mm lenses - the trifecta. I found it to be very hand-holdable with the 50 or 80mm lenses. Keep in mind if you put it on a tripod you either have to look down into the waist level finder (so, a lower tripod position), or get one of the prism finders to use the camera at eye level on a tripod.

 

[Andrew O'Neill]

I had a Hasselblad 500 c/m with the 50, 80 and 150mm lenses - the trifecta. I found it to be very hand-holdable with the 50 or 80mm lenses. Keep in mind if you put it on a tripod you either have to look down into the waist level finder (so, a lower tripod position), or get one of the prism finders to use the camera at eye level on a tripod.

There's a prism finder with the kit I'm interested in.

 

[tcolgate]

One downside. They are very annoying g to use filters with. There are at least two bayonet mount sizes. Original filters are rare and expensive (with a limited selection).
I got a cheap bayonet to screw mount adapter but they are cheap and don't fit securely.
The 50mm distagon I have uses a series filter and I had to find the retaining g ring separately. It has a weird thread pitch, it took a while to find a step up ring that would go on ok.
Now if I want filters I used a square filter holder and a weird mash of adapters.

 

[John Wiegerink]

One downside. They are very annoying g to use filters with. There are at least two bayonet mount sizes. Original filters are rare and expensive (with a limited selection).
I got a cheap bayonet to screw mount adapter but they are cheap and don't fit securely.
The 50mm distagon I have uses a series filter and I had to find the retaining g ring separately. It has a weird thread pitch, it took a while to find a step up ring that would go on ok.
Now if I want filters I used a square filter holder and a weird mash of adapters.

There are tons of Bay50 and Bay60 filter adapters out there and even Bay50 to Bay60 adapters. Some are better than others, just about like anything else. I buy the Hasselblad original filters if I think the price is right, which isn't very often. Otherwise I watch for Hoya since I've had good luck with those as far as threads go and end results. The only Hasselblad lens filter setup I struggle with is the 38mm Biogon on my SWC. As for prism finder? I have the 45 and 90 HC-4 and much prefer the later for hand-held carry and the 45 prism for the tripod. That's just me of course!

 

[djdister]

There's a prism finder with the kit I'm interested in.

So, no reason to wait...

Added bonus -- the Hasselblad has the most satisfying mirror/shutter sound of any camera!

 

[Andrew O'Neill]

So, no reason to wait...

Added bonus -- the Hasselblad has the most satisfying mirror/shutter sound of any camera!

Yes, I heard it first hand when the owner let me take it out for a stroll... on a very short leash, of course!