4season
Member
- Joined
- Jul 13, 2015
- Messages
- 1,995
- Format
- Plastic Cameras
202FA: I think it will be much more expensive than you realize because you probably want latest lenses, finders and backs which have electronic contacts and LCD windows and those aren't common.
If I had to choose an affordable Hasselblad, this might be my ideal outfit:
2000FC/M or 2003FC/W body, WLF, A12 back
110/2 lens.
Yes, the infamous 2000-series with fragile titanium shutter! I've owned a 2000FC/M and it was fine, just don't poke your finger into the shutter. These later models automatically retract the shutter when you remove a film back, thus protecting it from harm. Lens compatibility is great: It works with both F/FE shutterless lenses as well as C/CF/CFi. And IIRC it also has the oversized mirror like the 503 and newer cameras.
I have never owned the 110/2 but I would have liked to: Relatively compact, fast, focuses close. You can't use this on a 500-series camera body because it does not have a built-in shutter.
2000-series advantages: Nobody wants to touch them because they are afraid of that titanium shutter, so you may be able to get one cheaply. Minor dents or creases in the shutter should not be a problem. With reasonable care, perhaps they will outlast the 200-series cameras which use rubberized fabric shutters.
2000-series disadvantages: The sound of the titanium shutter might wake the baby! But the only really quiet 6x6 Hasselblads are the SWC and SWCM.
Okay okay if I had to choose between the three cameras listed, I'd take the 503CW as it's newish, the price sounds fairly decent, and I happen to like the old 50/4 lens. That lens uses drop-in filters, but IIRC, I just screwed in a 67mm(?) rubber lens shade (try to find one with a plastic ring if possible) and that screwed in half-way. Diameter is a common one, but the thread pitch is different. The 500c sounds OK as well. 500c viewscreen can be replaced by a technician, BTW.
If I had to choose an affordable Hasselblad, this might be my ideal outfit:
2000FC/M or 2003FC/W body, WLF, A12 back
110/2 lens.
Yes, the infamous 2000-series with fragile titanium shutter! I've owned a 2000FC/M and it was fine, just don't poke your finger into the shutter. These later models automatically retract the shutter when you remove a film back, thus protecting it from harm. Lens compatibility is great: It works with both F/FE shutterless lenses as well as C/CF/CFi. And IIRC it also has the oversized mirror like the 503 and newer cameras.
I have never owned the 110/2 but I would have liked to: Relatively compact, fast, focuses close. You can't use this on a 500-series camera body because it does not have a built-in shutter.
2000-series advantages: Nobody wants to touch them because they are afraid of that titanium shutter, so you may be able to get one cheaply. Minor dents or creases in the shutter should not be a problem. With reasonable care, perhaps they will outlast the 200-series cameras which use rubberized fabric shutters.
2000-series disadvantages: The sound of the titanium shutter might wake the baby! But the only really quiet 6x6 Hasselblads are the SWC and SWCM.
Okay okay if I had to choose between the three cameras listed, I'd take the 503CW as it's newish, the price sounds fairly decent, and I happen to like the old 50/4 lens. That lens uses drop-in filters, but IIRC, I just screwed in a 67mm(?) rubber lens shade (try to find one with a plastic ring if possible) and that screwed in half-way. Diameter is a common one, but the thread pitch is different. The 500c sounds OK as well. 500c viewscreen can be replaced by a technician, BTW.