This is a RH Designs Analyzer Pro Darkroom Printing Timer. Please note that the timer does not come with the exposure meter probe. The probe can be purchased from RH Designs: https://rhdesigns.co.uk/product/rh-designs-zm-any-pro-ii-metering-probe. The probe is not required to use the timer; the timer works fine without the probe, but you cannot use the exposure meter function without the probe.
This timer supports F-Stop exposure timing.
Included with the timer are the power cord, a short cord to allow you to plug your enlarger into the timer (which requires IEC connecters), and a footswitch.
This is the 110 volt model.
The operating manual can be printed from here: https://rhdesigns.co.uk/wp-content/uploads/2020/04/Analyser_Pro_UM_v64.pdf.
The timer sells for $524, plus shipping from RH Designs. I am asking $350, plus $25 CONUS shipping, net to me.
This timer supports F-Stop exposure timing.
Included with the timer are the power cord, a short cord to allow you to plug your enlarger into the timer (which requires IEC connecters), and a footswitch.
This is the 110 volt model.
The operating manual can be printed from here: https://rhdesigns.co.uk/wp-content/uploads/2020/04/Analyser_Pro_UM_v64.pdf.
The timer sells for $524, plus shipping from RH Designs. I am asking $350, plus $25 CONUS shipping, net to me.
Attachments
Last edited:
