For Sale FS: RH Designs Analyzer Pro Darkroom Printing Timer

[Keith Pitman]

This is a RH Designs Analyzer Pro Darkroom Printing Timer. Please note that the timer does not come with the exposure meter probe. The probe can be purchased from RH Designs: https://rhdesigns.co.uk/product/rh-designs-zm-any-pro-ii-metering-probe. The probe is not required to use the timer; the timer works fine without the probe, but you cannot use the exposure meter function without the probe.

This timer supports F-Stop exposure timing.

Included with the timer are the power cord, a short cord to allow you to plug your enlarger into the timer (which requires IEC connecters), and a footswitch.

This is the 110 volt model.

The operating manual can be printed from here: https://rhdesigns.co.uk/wp-content/uploads/2020/04/Analyser_Pro_UM_v64.pdf.

The timer sells for $524, plus shipping from RH Designs. I am asking $350, plus $25 CONUS shipping, net to me.

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[Keith Pitman]

Still available. Will consider offers.

 

[Keith Pitman]

Price reduced to $300, plus shipping.

 

[Keith Pitman]

Still available.

 

[Keith Pitman]

I’ll give this timer one more bump.

 

[Michael R T]

I've been interested in this since you first posted it, but honestly having to buy the probe and the calibration kit separately put me off because it seems to bring the total price up pretty close to that of a brand-new unit.

 

[Keith Pitman]

I've been interested in this since you first posted it, but honestly having to buy the probe and the calibration kit separately put me off because it seems to bring the total price up pretty close to that of a brand-new unit.

I think the pricing is reasonable, but you could make an offer if you are truly interested.