For Sale FS: RH Designs Analyzer Pro Darkroom Printing Timer

This is a RH Designs Analyzer Pro Darkroom Printing Timer. Please note that the timer does not come with the exposure meter probe. The probe can be purchased from RH Designs: https://rhdesigns.co.uk/product/rh-designs-zm-any-pro-ii-metering-probe. The probe is not required to use the timer; the timer works fine without the probe, but you cannot use the exposure meter function without the probe.

This timer supports F-Stop exposure timing.

Included with the timer are the power cord, a short cord to allow you to plug your enlarger into the timer (which requires IEC connecters), and a footswitch.

This is the 110 volt model.

The operating manual can be printed from here: https://rhdesigns.co.uk/wp-content/uploads/2020/04/Analyser_Pro_UM_v64.pdf.

The timer sells for $524, plus shipping from RH Designs. I am asking $350, plus $25 CONUS shipping, net to me.

Still available. Will consider offers.

Still available.

I’ll give this timer one more bump.

I've been interested in this since you first posted it, but honestly having to buy the probe and the calibration kit separately put me off because it seems to bring the total price up pretty close to that of a brand-new unit.

Michael R T said:

I've been interested in this since you first posted it, but honestly having to buy the probe and the calibration kit separately put me off because it seems to bring the total price up pretty close to that of a brand-new unit.

Click to expand...

I think the pricing is reasonable, but you could make an offer if you are truly interested.