8x10 conv
i have had quite a few questions on the conversion for sale.
here are informations:
the light box is with 53 pcs 3W leds driven by 2 led drivers. height is around 18 cm . led are glued on the 5 mm alu cooling / top plate.
the light has exactly same brightness as the original in my BW 300 head ( and that is the brightest of all durst enlargers)
and no need for cooling fan !!
the unit is made for 240 mm lens, negatives in 18x24 cm ( near 8x10")
all parts are lazer cut and spray painted in grey Hammerite paint, weight 9 kg same as original equipment.
all parts needed for the set up are included:
one light box compleate with led and driver and 10 pcs spare bulbs
one pyramid stub on stainless plate / carrier
one 8x10 glass neg. carrier book type
one BMF insert ,with a cut out hole, to replace the original 5x7 neg carrier
one insert / light seal for replacing the 8x10 neg carr. ,in case you want to use original Durst 5x7 carrier with the led head.
you only need to cut out 2 corners of the alu plate under neg carriager. (see picture, you see what i mean)
a screwdriver to take the old head off and a 10mm spanner for the new unit.
that is all !
with my conversion you are still able to use the enlarger precisely same way as before
,
nothing is altered apart from the small cut out.
if you dont use under lens filters you can use 5x7 neg holder, but you loose light then. i do not recc. that.
i have extra units for sale, a very, very fair price would be around 400 euro/dollar, estimated by my fotofriends in the club.
most of it is materials and external workshop expences.
postage from Denmark ?? i will look into that if you still are interested