Does anybody figured out how to clean dry masking tape glue residue? I tried isopropyl alcohol and lighter fluid and they clean ~90% of it but the hardest part, on edges, stays solid.
If you can't let the residue soak in naptha/lighter fluid, you may be reduced to scraping carefully. If you use a hard plastic scraper (like the edge of a credit card) you'll have the best combination of straight/sharp edge to break up and lift the residue, and soft enough material to minimize the risk of scratching whatever the tape was stuck on.
Is that a fancy version of so-called glue remover? I was going to suggest the remover because it will rather surely work fine and leave no residue nor would it damage anything (still test it before going wild).
They used to make one with orange scent, worked great, and smelled good enough too.
Do you mean the product doesn't work, or do you mean the link to an Amazon Canada product listing doesn't work for you?
Here is another link: https://googone.com/original-adhesive-remover
Not 100% sure about your masking tape, but for label glue, electrical tape, etc, the effective solvent is white spirit. Slightly oily, so post-cleaning with ethyl alcool or naphta may be necessary.
Do you mean the product doesn't work, or do you mean the link to an Amazon Canada product listing doesn't work for you?
Here is another link: https://googone.com/original-adhesive-remover
Maybe you are right? I use beige and black masking tape for so many things in darkroom, I should start buying just 3M brand of it.
Thank you Matt, Donald, Bernard and others!
Scraping can be challenging when surface paint is not glossy but more cracked.
Matt, in London Drugs, GooGone is even cheaper than on Amazon. Will report back my findings
I'm not sure how different GooGone is from naphtha (aside from the citrus scent), but it's worth a try.
You could also try acetone.
As mentioned above, you could also soak it. Try saturating a piece of paper towel or cotton ball with whatever you are using, and let it sit for a while, then gently scrape or rub. Repeat if it seems to work a little.
Sometimes I'll use an eraser to try to rub off residue, but you need to be careful of what you are removing it from - you don't want to mess anything up.
Goo Gone is made from citrus oil. I've never had it injure plastic, unlike acetone. Lighter fluid/naptha also seems plastic safe. TTBOMK, "white gas" (AKA Coleman Fuel) is naptha, but probably less pure than lighter fluid. Lighter fluid seems to leave no residue - a good feature for when a leaky Zippo seeps all over your suit.
That'll be the d-Limonene and ether-based ingredients. Ether is an aggressive solvent for organics, and limonene eats almost anything. Goo Gone is great on natural fiber fabric, enamel based paints, most kinds of rubber, and real leather -- none of which are commonly seen on cameras. Naptha will attack uncured oil based paints, as will mineral spirits (aka neutral spirits) -- but so will anything else that has any chance of softening the latex-based adhesive from masking tape.
Hmm, I guess I won't use it to flavor orange cake icing after all.
The stuff dissolves styrene plastics, at a guess - keep it away from plastic airplane models. I have never had any problem with the stuff and other plastics, famous last words, I know.
It certainly softens the polystyrene that's used for plastic models -- enough to make a mess of it if you try to use it to clean that plastic. The Goo Gone bottle, IIRC, contains a warning to test on an inconspicuous area before using on plastics or synthetic fabric.
Masking tape residue on my Multigrade head was not giving up after brief application of Goo Gone. After soaking it for a few hours with paper tissue on the top it all went away. Also, my flash power pack square rubber feet disintegrated and Go Gone cleaned it like new.
Thank you all for great advices!
I’ve had good luck with De-Solv-It Pro Contractors Solvent. It a citrus based product that I originally bought from a video supply house who sold it as a VHS cassette label remover. Now Ace Hardware sells it so it’s pretty easy to find. With dried on masking tape residue you need to apply it a few times and let it soak between applications. Patience the key.
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links. To read our full affiliate disclosure statement please click Here.
