Cinestill DF96 monobath

[Huss]

I hope that day comes sooner rhater than later.

Thank you!

 

[Huss]

Rolleiflex 2.8 GX, Fuji Acros Neopan, DF96 Monobath

 

[Huss]

Nikon F2, 45mm 2.8 AI-P, Kentmere 400, DF96 Monobath

 

[Huss]

Waving to Ruth before the asteroid hits.

Nikon F2, 45 2.8 AI-P, Kentmere 400, DF96 Monobath

 

[Huss]

Nikon F2, 45mm 2.8 AI-P, Kentmere 400, DF96 Monobath

 

[Huss]

Nikon F6, Sigma Art 50 1.4, Kentmere 400, DF96 Monobath

 

[Huss]

Nikon F6, Sigma ARt 50, Kentmere 400, DF96

 

[Huss]

Leica MP, TTA 28 5.6 BP, Arista 100, DF96 Monobath

Clean up volunteers

 

[Huss]

Leica M5, CV 35 1.4 v2, Arista 100, DF96 Monobath

 

[Huss]

Leica M5, CV 35 1.4 v2, Arista 100, DF96 Monobath

 

[Huss]

Leica MP, TTA 28mm 5.6 BP, Lomo Fantome 8/Orwo DP21, DF96

 

[Huss]

Lomo Fantome 8/ Orwo DP 21

 

[Huss]

Leica MP, TTA 28mm 5.6 BP, Lomo Fantome 8, DF96

 

[Huss]

Ach, roll #8 in still fresh DF96 shows severe bromide drag w CatLabs 320 Pro... No issues with other film at this point. Using my same agitation techniques as with other films that do not show bromide drag.
Not a dig on CatLabs, I guess DF96 is not a decent match for it. So now that is three films for me that don't work well with DF96 - Catlabs 320, Silberra Orta, Adox CMS 20.

 

[Huss]

This roll of Acros II was developed immediately after the Catlabs disappointment. Which shows it was an incompatibility.

Leica M3, 90mm Macro Elmar, Acros II, DF96

 

[Huss]

Nikon F2, Nikkor 45 2.8 AI-P, Kentmere 400

 

[Huss]

Leica MP .58, TTA 28 5.6 BP, Lomo Fantome 8, DF96 Monobath

 

[Huss]

Leica M7, CV 40 1.2, Kentmere 400, DF96

 

[Huss]

 

[Huss]

 

[Huss]

Leica M7, CV 40 1.2, Kentmere 400

Just after a storm blew through, we had sweet waves and clean air..

 

[Huss]

DF96 w Acros II

 

[Huss]

Pentaz Zoom 90WR, Kentmere 400

 

[Huss]

Rollei QZ35W, Kentmere 400

 

[Kino]

Glad to see the Kentmere 400 works well with the monobath.