For Sale Canon F1n with Power Winder, 50/1.4 S.S.C, and some extras [EU]

[Laurent]

I'd like to "unload" some cameras, so this lovely F1 has to go. I had an offer on a local site, but the guy wanted to turn it in a "shelf queen" to show the Speed Finder... This camera is a user, not a shelf queen

It works like a charm, shows some brassing (the covers are not the originals, the serial # is much higher) and a dent on the prism. Meter works fine, foams have been repoaced (the back is a bit tight to open due to this).
The 50mm works fins, shows some wear but has no fungus.
The winder is missing the vertical shutter button, and the cover for the S/Off/C button is missing. It received a shock so the plastic covers are not pristine. Good news: works as fine as new (I replaced the power lines that were giving some trouble)

Included are the body and lens caps, the original plate for the body, plus an "L" flash coupler and a remote for the winder.

If it sells on APUG Photrio, % will be given to Photrio, and I'll add the Kanto MR-9 adapter as well as a working cell (changed some months ago, so has plenty of life).

I'd like to get €300, plus shipping (around €20)

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[eli griggs]

This is such a good looking camera, I only wish I had a space in my bag for it but several of its brothers and Ftbql's cry out "no mas, no mas..." and I have to respect their wishes.

Good luck with you sale!

PS: try FIMO for new plastic button repairs/manufacturing.

 

[Laurent]

This is such a good looking camera, I only wish I had a space in my bag for it but several of its brothers and Ftbql's cry out "no mas, no mas..." and I have to respect their wishes.

Good luck with you sale!

PS: try FIMO for new plastic button repairs/manufacturing.

Thanks !

The issue with that buttons is it relies on 3 'prongs' both for keeping it in place, lock the buttons and accurate the shutter. I'd have modeled a 3d printed one of I though it would work. May ne I'll do if the camera says too long before selling.

At the moment a replacement for a Pentax Spotmeter cover uses all my modelling brain power.