Brownish mottling/staining on my fiber prints after selenium toning

Philippe-Georges

Subscriber
Joined
Apr 11, 2005
Messages
2,679
Location
Flanders Fields
Format
Medium Format
Dear Koraks,

I appreciate your very informative and elaborated writings, this proves that I will never be to old to learn!

Concerning the stop bath: cost effectivity was never really my goal, but at the time when AGFA demised and I started working with Pyrocat-HD (pure coincidence), the only knowledge I had was not to use acids with staining developers and to avoid an acetic stop bath when using neutral-to-alkaline (C-41) fixers.
The Ryui formula was all I found that could be used with the chemical compound I had sitting in my dark room being a bucket of 5 kg Sodium Hydroxide pearls that was given to me by a baker (*) who stoppend business...

BTW, about washing film and/or FB paper, Ilford published an interesting article discussing this.

(*) Diluted Sodium Hydroxide is sprayed over cookies just before they go into the oven, so these get a nice yet resistent crust that can't crumble when packed and transported (how appetizing). In the old times salted water was used but was less effective.
 

koraks

Moderator
Moderator
Joined
Nov 29, 2018
Messages
23,240
Location
Europe
Format
Multi Format
Philippe-Georges said:
(*) Diluted Sodium Hydroxide is sprayed over cookies just before they go into the oven, so these get a nice yet resistent crust that can't crumble when packed and transported (how appetizing).
Click to expand...

So we both learned something today
Hang on to that sodium hydroxide; it's very convenient to keep around the house. I always buy it as drain cleaner pellets and use it whenever something calls for a rise in pH and the sodium ion doesn't hurt (if it does, I also have some potassium hydroxide).

Rest assured on the C41 as well as the pyrocat - acid stop bath works A-OK with both. Of course, there's nothing badly wrong with the Suzuki buffered stop bath. I understand you've been using it for years now and apparently with no ill side effects. So no sweat!
 

DREW WILEY

Member
Joined
Jul 14, 2011
Messages
14,014
Format
8x10 Format
I never replenish anything, but just mix enough for the day's session. That alleviates a lot of headaches.
 

john_s

Subscriber
Joined
Nov 19, 2002
Messages
2,147
Location
Melbourne, A
Format
Medium Format
koraks said:
Of course, there's nothing badly wrong with the Suzuki buffered stop bath.
Click to expand...

And my stop bath (see above) is analogous to the Suzuki one, just using sodium metabisulphite instead of acetic acid. I don't reuse it usually, though it does last a while.
 

Sirius Glass

Subscriber
Joined
Jan 18, 2007
Messages
50,399
Location
Southern California
Format
Multi Format
DREW WILEY said:
I never replenish anything, but just mix enough for the day's session. That alleviates a lot of headaches.
Click to expand...

Perhaps you should see a neurologist about the headaches. I never got a headache as a result of replenishing developers.
 

Philippe-Georges

Subscriber
Joined
Apr 11, 2005
Messages
2,679
Location
Flanders Fields
Format
Medium Format
DREW WILEY said:
I never replenish anything, but just mix enough for the day's session. That alleviates a lot of headaches.
Click to expand...

That's an option like an any other...
But, not reusing chemicals involves more waste, not to mention economy (which isn't the main reason why I replenish).
And in some cases, I just filter the product (*)...

Avoiding headaches is rather simple: just stick a pice of masking tape on the jug and write on it the date of first use and the amount or the surface that went through. It's just a matter of basic working discipline and organisation (which is paramount in a darkroom).

(*) This is how I do it while tidying up the darkroom, thanks to gravity...


Sorry for the digital photo...
 

Bill Burk

Subscriber
Joined
Feb 9, 2010
Messages
9,323
Format
4x5 Format
I had staining with fresh fix, after too short a water wash. So have moved to a longer wash before KRST. This with Ilford Galerie.

Now I give about an hour wash before toning, if I am toning at all.

Bleaching does no good because it’s not silver after toning. It’s silver selenide.
 

nmp

Member
Joined
Jan 20, 2005
Messages
2,028
Location
Maryland USA
Format
35mm
I have been reading this thread with interest - in context of recently trying to find a good way to check/test my salt print process for adequate fixing and archival washing.

Am I deducing correctly from the discussion that if a drop of dilute KRST stains a fully processed (fixed and washed) print, it may be due to either incomplete fixing (residual silver chloride) or not fully washing out the products of fixation or both. To test washing efficiency separately, a better way is to use something like HT-2 (acidified silver nitrate) that will react with the fixer but not any residual silver chloride.

:Niranjan.
 

DREW WILEY

Member
Joined
Jul 14, 2011
Messages
14,014
Format
8x10 Format
I always give a long final wash in the slot washer. But I have never had a toning issue as long as the prints sat in a holding bath of water a little while fist , at least not since I began standardizing on TF4 archival fixer. I sorta remember it happening long ago, when I was first learning and using ordinary hypo. For me, final print quality is a lot more important than a little extra cost. Besides, I generally needed to conserve time too ("time is money"). And not a single print of mine ever since has shown the slightest symptom of improper fixing. Long fix times, second baths, replenishment, HCA - been there, but will never return to it.
 

nmp

Member
Joined
Jan 20, 2005
Messages
2,028
Location
Maryland USA
Format
35mm

I understand. That makes sense for the conventional silver gelatin. However, for the salt print the issue is more complicated. First it is much more difficult to fix and wash salt prints to completion because of myriad of reasons. Secondly, the optimum conditions seem to vary according to the particular recipe and the type of paper used. So an universal fixing and washing routine may not work. That's why I want to have an analytical method or two that can quickly tell me if I have the right set of processing conditions while I tinker with various chemistry and paper combinations.

:Niranjan.
 

DREW WILEY

Member
Joined
Jul 14, 2011
Messages
14,014
Format
8x10 Format
Well, any alt process has its own complications. While I greatly admire such media when well done, and even have a variety in my overall collection, I simply don't have time for alt work myself, already being highly involved not only with conventional silver printing, but deeply into color as well. I need another lifetime or two.
 

nmp

Member
Joined
Jan 20, 2005
Messages
2,028
Location
Maryland USA
Format
35mm

Yeah, alt process is like a time-pit. No matter how much you put in, it's never enough....
 

snusmumriken

Subscriber
Joined
Jul 22, 2021
Messages
2,516
Location
Salisbury, UK
Format
35mm

+1.

When I adopted the two fixer bath strategy, the pinky-grey stains I sometimes got with fibre MG in selenium toner stopped happening. Almost entirely. The one thing that brings them back is if I neglect to rock the dish and keep the print covered while it is fixing. I use just 1 litre of solution in a 16x12 tray, so there is less than 1 cm depth and rocking is critical. I also mix fresh solution for the second fixer bath every day I spend in the darkroom. I don't use sodium sulphite, but I wash for at least 15 min between fixing and toning.
 

Philippe-Georges

Subscriber
Joined
Apr 11, 2005
Messages
2,679
Location
Flanders Fields
Format
Medium Format
I forgot to show wat's left once KRST is filtered after an one day printing session, this shows that a lot is carried over...

This is (was) 2,5l 1+9 of work dilution.

 
Last edited:

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,171
Location
Delta, BC Canada
Format
Medium Format
I think you should post that image in one of the "Is it Art?" discussion threads here on Photrio.
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,171
Location
Delta, BC Canada
Format
Medium Format

Doremus Scudder

Member
Joined
Sep 10, 2002
Messages
3,596
Location
Eugene, Oregon
Format
4x5 Format
Washing prints before selenium toning is not necessary as long as you transfer them directly from a fixing bath that is 1) not exhausted 2) the prints are fully-fixed and 3) the fixer pH is not so acidic as to react with the toner to cause stains.

Ansel Adams recommended a plain hypo second fix (sodium thiosulfate and sodium sulfite). I use Ilford Rapid Fixer or Hypam at the 1+9 dilution with excellent results. In the past I've used TF-4 as well as a plain hypo second fix. Both of those worked just fine when transferring prints directly from fix 2 to the selenium toner.

Different toners may require more thorough washing. Also, if you do use an acid fixer only, especially with a one-bath fixing regime, a thorough wash may be needed before selenium toning.

And, if you're getting overall yellowish stains or lots of mottling when selenium toning, your prints are likely not adequately fixed. Note that selenium toner makes a good test for residual silver compounds and is a good test for adequate fixing just like ST-1.

Best,

Doremus
 

Philippe-Georges

Subscriber
Joined
Apr 11, 2005
Messages
2,679
Location
Flanders Fields
Format
Medium Format
Just to check out: I remember to have read somewhere that preparing a KRST work dilution could be done with work dilution of Kodak HCA instead of plain water.
I can't recall where, but is it correct?
 

MattKing

Moderator
Moderator
Joined
Apr 24, 2005
Messages
53,171
Location
Delta, BC Canada
Format
Medium Format
Philippe-Georges said:
Just to check out: I remember to have read somewhere that preparing a KRST work dilution could be done with work dilution of Kodak HCA instead of plain water.
I can't recall where, but is it correct?
Click to expand...

You can, but it isn't recommended.
The HCA has much less capacity than the Selenium toner, so you end up having to discard Selenium toner that would otherwise still have usable life still in it.
 
OP
OP

BHuij

Member
Joined
Oct 12, 2016
Messages
870
Location
Utah
Format
Multi Format
Thanks all for some excellent information and an enlightening discussion.

I'm almost certain that my issues were due to under-fixing (and probably insufficient rinsing prior to toning). I was going off of the TF-5 label's recommendation of 40 8x10s or film rolls per liter of working strength fixer. Although I was only at around 30 sheets on that bottle of fixer, it had visible silver floating around in it and was definitely exhausted, or at the very least too exhausted to do its job in the 4 minutes I've standardized around in my printing process.

Went ahead and mixed fresh fixer, made sure to agitate less lazily, and gave the print a good, thorough rinse after fixing and prior to toning, and didn't get any staining. I've amended my process to only allow 20 8x10s through the fixer before replacing it going forward.
 
You must log in or register to reply here.
Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…