Bronica ETR film backs

  • A
  • Thread starter Deleted member 88956
  • Start date

Shadow 2

A
Shadow 2

  • 0
  • 0
  • 16
Shadow 1

A
Shadow 1

  • 2
  • 0
  • 17
Darkroom c1972

A
Darkroom c1972

  • 1
  • 2
  • 31
Tōrō

H
Tōrō

  • 4
  • 0
  • 39

Recent Classifieds

Forum statistics

Threads
198,826
Messages
2,781,485
Members
99,718
Latest member
nesunoio
Recent bookmarks
0

Deleted member 88956

This question is about reliability between all 3 vintages of ETR backs. All I have is the latest ones with grey handle on dark slide and flip-up film winding crank.

The older ones had: single back release latch (I won't be getting this anyways) and then film winding was either a thumb wheel or a flip-up half circle handle.

Any experiences with any of those in (specifically) reliability and / or operation? Has the dark slide light trapping been changed / re-designed over time? (meaning the entry slot as there have been some problems reported, but no idea which vintage it applied to)
 

choiliefan

Member
Joined
Dec 27, 2013
Messages
1,311
Format
Medium Format
I wonder if the film inserts themselves are different between earliest and latest model backs?
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
The original film backs have one locking tab, and the film winding is like half moon shape flipper. This should be avoided because the locking tab can break down. And the film backs are really old.
The film backs (called late?) changed with the updated ETR-S (black body). Newer film backs some with two locking tabs and the winding is knob on the side. I think the dark slide still black color plastic.
The latest film backs (Ei?) have two locking tabs and flip down winding crank to forward the film. I believe the dark slide handle changed to grey color (not sure when).
The dark slide added the locking mechanism, probably with the Ei version.
There is not much difference with the "late" and "Ei" backs in terms of functionalities. The white arrows on the locking tabs may be slightly different with Ei having a longer arrow.

In general, the inserts and shells of "late" and "Ei" can inter-change. But they may not fit really well the older film backs. That should be avoided.
 

abruzzi

Member
Joined
Mar 10, 2018
Messages
3,060
Location
New Mexico, USA
Format
Large Format
I've never had a single release back--all mine are double release. One of my double release backs was old and beaten. It had a black handle on the dark slide, and the dark slide did not lock in place when the back was off the camera. (I don't know if this was by design, or because it was broken.) One of the two releases on that back was very loose and could spin around. My fix was simple--I found the newest 220 back I could find for $20, and replaced the 220 insert with the 120 insert. That way the futzy back has the 220 insert (since I don't have any 220 film), and the nice newer back had the 120 insert from the older back. I don't know if an even older (i.e. single release) back and insert are compatible with newer backs and inserts, but I wouldn't be surprised if it was.
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
I've never had a single release back--all mine are double release. One of my double release backs was old and beaten. It had a black handle on the dark slide, and the dark slide did not lock in place when the back was off the camera. (I don't know if this was by design, or because it was broken.) One of the two releases on that back was very loose and could spin around. My fix was simple--I found the newest 220 back I could find for $20, and replaced the 220 insert with the 120 insert. That way the futzy back has the 220 insert (since I don't have any 220 film), and the nice newer back had the 120 insert from the older back. I don't know if an even older (i.e. single release) back and insert are compatible with newer backs and inserts, but I wouldn't be surprised if it was.

You can mix the insert and shell from different generations. But it is not recommended. No point to save $30 and ruin rolls of films.
 

moto-uno

Member
Joined
Sep 28, 2009
Messages
585
Location
Burnaby, B.C
Format
Medium Format
^ How perchance does it ruin rolls of film ? I ask this because I own an Etrs and an Etrsi and numerous backs and inserts .
These I change frequently, sometimes , just 'cuz I can , and haven't noticed any differences , am I just lucky ? Peter
 
OP
OP

Deleted member 88956

^ How perchance does it ruin rolls of film ? I ask this because I own an Etrs and an Etrsi and numerous backs and inserts .
These I change frequently, sometimes , just 'cuz I can , and haven't noticed any differences , am I just lucky ? Peter
I don't think there is any basis to make a claim inserts are not interchangeable between back shells. All of it being precision tooled on manufacturing front, Bronica would have been known for serious quality control issues had there been differences piece to piece large enough to make such a claim stick. And think about production headaches matching each insert to shell before distribution for the however many thousands made over the years.

Now, if we think about Soviet camera making, then we're speaking to the choir.

Happy New Year
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
No one claims anything. It is based on actual experience. It has nothing to do with quality control. Japanese or Soviet...

The Bronica ETR series were made from 1976 to 2004, that is 28 years. The film backs have undergone at least 3-4 major designs. The inserts and shells were never guaranteed to be 100% compatible across generations, or mis-matched.
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
^ So I'm just lucky ? Peter
You should feel you always lucky... :smile:

The last two major designs, both "late" and "Ei" should fit each other well. But the much older single latch backs are different story.
 

moto-uno

Member
Joined
Sep 28, 2009
Messages
585
Location
Burnaby, B.C
Format
Medium Format
^ Well that's interesting , over the years of collecting Etrs backs I've always shied away from the single latch backs , more good luck :smile: , Peter
 
OP
OP

Deleted member 88956

You should feel you always lucky... :smile:

The last two major designs, both "late" and "Ei" should fit each other well. But the much older single latch backs are different story.
As far as I can tell nothing has ever changed in overall shape or dimensions in these backs, from first to last. All they had done were refinements in how they are operated, so the double latch only changed how the locking sliders are engaged, the winding was nothing else but ergonomy. The only thing that might have been changed, and drove me to ask, was the dark slide entry point light sealing (even if I actually doubted that was the case).

And yes, regarding your assertion about incompatibility over the production samples, it has a lot to do with tooling used and quality control.

I brought up Soviet era gear as they are known for complete lack of that and huge final quality differences piece to piece. The latter being main reason for hearing opinions from very good to complete junk about same camera from same production year. Japanese on the other hand, had high quality precision production for a long time and I'd say from about mid sixties on.
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
As far as I can tell nothing has ever changed in overall shape or dimensions in these backs, from first to last. All they had done were refinements in how they are operated, so the double latch only changed how the locking sliders are engaged, the winding was nothing else but ergonomy. The only thing that might have been changed, and drove me to ask, was the dark slide entry point light sealing (even if I actually doubted that was the case).

And yes, regarding your assertion about incompatibility over the production samples, it has a lot to do with tooling used and quality control.

I understand that English is probably not your first language, but the words you use and the way you talk is troublesome.

I only tell my experience from handling many and many Bronica equipment, pretty much all lines. It is not any assertion or any such kind.

I never assert that those film backs are incompatible. I only said there is no guarantee that the inserts and shells from over 28 years production can mix and fit well. I never have had troubles mixing the "late" and "Ei" backs. But I've had a lot trouble mixing the really old chrome backs with single latch with the newer ones. You or some others may have better luck. Just maybe.

Please read, think and think more before you click the "send" button...
 

Johnkpap

Member
Joined
Aug 21, 2006
Messages
293
Location
Australia
Format
Medium Format
The only problems I have encountered with ETR backs is that the old single catch types... the catch can fail after many many years of use, and I have had one of the plastic wheel inserts fail as well

I have also had to replace all the foam seals on my backs

I have had no problem mix and matching inserts and backs

Johnkpap
 

macfred

Subscriber
Joined
Nov 6, 2014
Messages
3,839
Location
Germany
Format
Multi Format
Two older backs here - one with a small foldable crank (''ETR'' written on the backside) and another with the thumb wheel (no letters on this one) - both working like they should.

I noticed that the darkslide (black handle) that came with the 'thumb wheel - back' does not lock the shutter when using it with the newer 'crank' - back (which came with a grey handle darkslide).

Edit :

I can detach my oldest back from the ETRSi bodies even when there's no dark slide in.
 
Last edited:
OP
OP

Deleted member 88956

I noticed that the darkslide (black handle) that came with the 'thumb wheel - back' does not lock the shutter when using it with the newer 'crank' - back (which came with a grey handle darkslide).

Edit :

I can detach my oldest back from the ETRSi bodies even when there's no dark slide in.
Have you compared black vs grey handle dark slides side by side? If what you experienced is intended by design, there must be an obvious difference. I assume that same back with grey slide does lock shutter and the black slide with thumb wheel back also does?
 

macfred

Subscriber
Joined
Nov 6, 2014
Messages
3,839
Location
Germany
Format
Multi Format
The black handle darkslide only works with the older back; the grey handle one works with both backs.
Grey vs black handle darkslide to see the difference:
IMG_0507.jpg
 
OP
OP

Deleted member 88956

The black handle darkslide only works with the older back; the grey handle one works with both backs.
Grey vs black handle darkslide to see the difference:
View attachment 237312
Aha, so we have found a critical difference, thanks. I was sopping for latest versions and so far this seems to be the way to go, barring some super bargain and perhaps use of a back for some modification project.
 

choiliefan

Member
Joined
Dec 27, 2013
Messages
1,311
Format
Medium Format
You could notch a black-handled one with a Dremel abrasive cut-off blade.
 
OP
OP

Deleted member 88956

You could notch a black-handled one with a Dremel abrasive cut-off blade.
For one who's got them it sure is a solution. Sucks to be able to pull out the dark slide with back off and film inside. Bad Bronica, real bad.
 

RedSun

Member
Joined
Aug 27, 2012
Messages
680
Location
New Jersey,
Format
Multi Format
For one who's got them it sure is a solution. Sucks to be able to pull out the dark slide with back off and film inside. Bad Bronica, real bad.
Maybe Bronica hired some Soviet engineers to design the film backs.

Seriously, we have been using those film backs for many many years. I have never had any incident to ruin my film. It is the knowledge.

Also, you'll need to match the dark slides with the correct film backs, or the locking mechanism has no effect. You can say this is my assertion.

Good luck with it.
 

moto-uno

Member
Joined
Sep 28, 2009
Messages
585
Location
Burnaby, B.C
Format
Medium Format
So as a follow up , the two backs on the left have a serial # starting with 83 . The right arrow indicates the tab that locks the dark slides that have a small notch . The tab on the
left hand side is also metal instead of plastic , as on the right hand back with serial # starting with 81 . The dark slides without the notch fit well in both backs , but don't lock with
the backs off , so be careful.
 
Last edited:
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom