Aires Viscount M2.8

The Kildare Track

A
The Kildare Track

  • 5
  • 1
  • 51
Stranger Things.

A
Stranger Things.

  • 1
  • 0
  • 31
Centre Lawn

A
Centre Lawn

  • 2
  • 2
  • 48

Recent Classifieds

Forum statistics

Threads
198,907
Messages
2,782,927
Members
99,745
Latest member
Larryjohn
Recent bookmarks
0

Eric the Red

Member
Joined
Dec 30, 2021
Messages
42
Location
9k8
Format
Analog
Greetings fellow camera enthusiasts!

I have recently come into possession of this camera. It comes with a Seikosha SLV shutter. I have gone over it very carefully in preparation for use, and the only thing I can find wrong with the camera, is that occasionally, the shutter sticks. When you can catch it, you can see the leaves opening and then slowly closing. Next fire, it works fine. Then eight or so shots maybe a lot more later, same thing. I want to take it apart, and give it a good cleaning, but I can find absolutely no information whatsoever to getting to the shutter on this camera. I can find all sorts of info to rebuilding it, just nothing on the disassembly of the camera to get to the shutter. Any suggestions please?

Thank you in advance!
Eric
20231009_102934.jpg
 

OAPOli

Member
Joined
Sep 26, 2022
Messages
684
Location
Toronto
Format
Medium Format
You typically have to remove the top and bottom covers and peel the leatherette on the front near the lens. There would be four screws holding a plate with the lens/shutter/helicoid assembly. Removing the plate gives you easy access to the shutter retaining ring for removal. You might be able to remove the ring from the rear of the camera without removing the plate. But generally there is not enough room for a tool because of the baffles, plus the sync cable will be tight when the shutter comes off. Watch out for the screw holding the advance lever, it usually is left-hand threaded.

Edit. check the leatherette first, maybe you won't have to remove the top and bottom plates
 
Last edited:

albada

Subscriber
Joined
Apr 10, 2008
Messages
2,175
Location
Escondido, C
Format
35mm RF
I suspect the easiest way to gain access to the shutter blades on this camera is to remove the rear element of the lens, and then open the aperture fully. Then you can gently rub the shutter leaves with a cotton swab soaked with electronics cleaner.
When you open the back, you'll see that three black metal rings surround the rear glass lens-element. The middle and outer rings have a pair of notches in them for a tool. Unscrew the middle ring, and the rear lens-group will come out, exposing the blades, so you can clean them. BTW, the outer ring secures the shutter.
 

Kino

Subscriber
Joined
Jan 20, 2006
Messages
7,763
Location
Orange, Virginia
Format
Multi Format
This video shows how to clean the Aires IIIC shutter, which is a Seikosha MXL shutter, but it might be close enough to get you through the cleaning.

Japan Vintage Camera:
 
OP
OP
Eric the Red

Eric the Red

Member
Joined
Dec 30, 2021
Messages
42
Location
9k8
Format
Analog
Thank you gentlemen, for the replies. After I am back from vacation, I will make another attempt at this camera.

Have a good weekend.

Eric
 
Photrio.com contains affiliate links to products. We may receive a commission for purchases made through these links.
To read our full affiliate disclosure statement please click Here.

PHOTRIO PARTNERS EQUALLY FUNDING OUR COMMUNITY:



Ilford ADOX Freestyle Photographic Stearman Press Weldon Color Lab Blue Moon Camera & Machine
Top Bottom