Search results

Thank you for introducing yourself. Welcome to Photrio!

A directory which one can look up a camera, lens or problem and find a list of threads or urls to read.

Thank you for your work. If you could cross reference threads on Photrio and elsewhere then it would be great if this thread were made a reference source on Photrio, that would make finding repair information much easier for Photrio members and subscribers.

Thank you very much for this post. Finding places for Hasselblad 200 series repairs has become difficult and any active sources are greatly appreciated.

I have used Tempe Camera Repair for years for my WideLux F7 https://www.tempecamera.biz/REPAIR_DEPARTMENT_s/17.htm

A wise decision. Hopefully he never asked to see it hanging on your walls.

Welcome to Photrio. Mine was broken off. I never replaced it. Instead I lift the tank or drum by hand on the end of the drum.

RIP. Thank you for posting.

I agree. It is a C41 film and likely ISO 100. If it were ISO 160 or 400 and exposed at ISO 100, the exposures would still be usable.

And to the point of discussion: When I was searching for sheet tank development, I tried the Jobo 3010 Expert Drum with a Jobo processor I got consistent, properly developed sheet film with C-41 color and black & white film that was not only streak free but superior and any of several tray and...

Both with replenished XTOL. Maris' comments go to my comment about XTOL is very forgiving.

Especially after she adds in the cost and installation of the charging station. 😂

It is quite common in the Normandy Invasion Battlefield cemeteries and other World War II cemeteries though out Europe.

What about leaving the lens cap screwed on to the middle lens as in this above photograph?

Get it fixed if possible, otherwise get a replacement light meter.

Other than retaking the photograph, nothing can correct a poor choice for the original angle of the photograph.

I crop before photographing, but that has not stopped me from later cropping in dark room if I see it as an improvement.

The vignetting might not appear with a "thin" or "wide angle" filter alone and using such a filter with a lens hood the vignetting might not appear. One would have to test both configurations.

Graflex: Open lens shutter to use the focal plane shutter, pull the dark slide, cock the focal plane shutter -- @XXCT@#@@@!!!!!!

I rinse them out with water the best I can, then push out the water. I found that their funnel is almost required to fill the bags without spilling the chemicals.

Primarily XTOL in the replenished form. I rarely use my second choice Pyrocat-HD glycol. I stopped doing C-41 development since it is more practical for me to have Samy's Camera do all my color development and printing.

The barn doors need servicing. It would is likely that other things need servicing. We could recommend someone in your area to do the CLA [Clean, Lubricate, and Adjust] if you had put your actual location. Welcome to Photrio.

Welcome to Photrio. I am looking forward to seeing your panoramic photographs when you get it fixed.

Example: I have mixed Stock XTOL in 1 liter bags that has lasted, unopened for years and is still good. When I do go to use it, I will test it on a strip of film, as I would with any developer.

I bought a used Minolta SR-7 in 1966 and owned MC and MD lenses. I agree that you cannot mishandle the Minolta optics.

Contact https://www.tempecamera.biz/REPAIR_DEPARTMENT_s/17.htm and see if they can service the Noblex, they do my WideLux servicing work.

GAS is good. I never resist it, as if I could. It led me to MF and LF which would not happened without GAS.

I have gotten great service from Tempe Camera Repair https://www.tempecamera.biz/REPAIR_DEPARTMENT_s/17.htm for my WideLux servicing in the US.

I am happy with replenished XTOL done in a Jobo processor. I like the sharpness, the grain and the tonality. I will consider EMA if I see something really wonderful, but so far I am not sold on EMA and I love the forgiveness of XTOL.

Clarification: I meter the place with the darkest shadow detail I want and place that in the Zone of choice. That reading is transferred to the Hasselblad and from then on I use EV for all the settings and any filter factor adjustments.