Richard S. (rich815)
Member
FS: Rolleiflex 3.5E Planar - Fleenor-overhauled, Maxwell screen
For sale is one of my beauties. I hesitate to sell because it is one of my most treasured Rolleiflex TLRs but I have more than my share as is and am looking to finance another hobby. Serial # 1753xxx.
I bought this originally from Randy of Holgamods about 6-7 years ago. In 2012 I sent it to Harry Fleenor for a look-over and he did a full shutter and transport overhaul as well as a professional install and calibration of a Maxwell #1 screen. This is the screen with a grid, split image and a micro prism ring. It is very bright and *snaps* into focus nicely. He also straightened a bent foot, secured the tripod mount plate, and replaced one of the strap-holders. Total cost for the work was over $300 USD not counting the Maxwell screen (which go for $275 plus installation fee).
The following of my photos were taken by me with this exact camera:
https://flic.kr/p/q1Jjyi
https://flic.kr/p/fvoA1B
https://flic.kr/p/gPDYoE
https://flic.kr/p/mMSKDD
https://flic.kr/p/9yNt9P
While not MINT it is in excellent condition with only a few minor areas of wear and use (see all photos) but barely any tarnishing at all and all chrome nice and shiny The lenses are perfect, coating flawless, aperture blades smooth and clean, all shutter speeds work however 1/2 second and 1 sec does hang just a bit and are about 1/3rd to 2/3rd stop slow (tested using Shutter-Speed from Lukas Fritz' iPhone app). Shooting B&W film primarily and often either on a tripod shooting 3-5 seconds or hand-held over 1/125 - 1/250th I have not had any issues. However due to the slow 1/2 and 1 second speeds I'm knocking $100 off my price to go towards that (however you can likely use for years as-is). The meter does react to light and seems fairly accurate in daylight but I rarely relied on it so cannot 100% attest to it's full accuracy in all lighting conditions.
Price: $825 USD plus $25 shipping cost. CONUS only (sorry for non-US people but I just don't have time to wait in line at the Post Office at this time of year)
I have been an APUG member since January 2003 buying and selling many times here, and have 100% positive feedback on eBay under rolleirich815 since 1999.

For sale is one of my beauties. I hesitate to sell because it is one of my most treasured Rolleiflex TLRs but I have more than my share as is and am looking to finance another hobby. Serial # 1753xxx.
I bought this originally from Randy of Holgamods about 6-7 years ago. In 2012 I sent it to Harry Fleenor for a look-over and he did a full shutter and transport overhaul as well as a professional install and calibration of a Maxwell #1 screen. This is the screen with a grid, split image and a micro prism ring. It is very bright and *snaps* into focus nicely. He also straightened a bent foot, secured the tripod mount plate, and replaced one of the strap-holders. Total cost for the work was over $300 USD not counting the Maxwell screen (which go for $275 plus installation fee).
The following of my photos were taken by me with this exact camera:
https://flic.kr/p/q1Jjyi
https://flic.kr/p/fvoA1B
https://flic.kr/p/gPDYoE
https://flic.kr/p/mMSKDD
https://flic.kr/p/9yNt9P
While not MINT it is in excellent condition with only a few minor areas of wear and use (see all photos) but barely any tarnishing at all and all chrome nice and shiny The lenses are perfect, coating flawless, aperture blades smooth and clean, all shutter speeds work however 1/2 second and 1 sec does hang just a bit and are about 1/3rd to 2/3rd stop slow (tested using Shutter-Speed from Lukas Fritz' iPhone app). Shooting B&W film primarily and often either on a tripod shooting 3-5 seconds or hand-held over 1/125 - 1/250th I have not had any issues. However due to the slow 1/2 and 1 second speeds I'm knocking $100 off my price to go towards that (however you can likely use for years as-is). The meter does react to light and seems fairly accurate in daylight but I rarely relied on it so cannot 100% attest to it's full accuracy in all lighting conditions.
Price: $825 USD plus $25 shipping cost. CONUS only (sorry for non-US people but I just don't have time to wait in line at the Post Office at this time of year)
I have been an APUG member since January 2003 buying and selling many times here, and have 100% positive feedback on eBay under rolleirich815 since 1999.

🛡️ Classifieds Safety Reminder:
Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.
Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.
Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.
Last edited:

