I have a Zone VI 11x14 archival print washer that's just too big for my small darkroom. There were a couple of versions; I believe mine is the later one. It holds up to 13 11x14 or 26 8x10 prints.
Pics here: http://tinyurl.com/mt3r52z Note: those are reflections, not marks on the plexiglass.
It includes all the dividers and the top piece (used to keep paper from floating up). No cracks or leaks. Prior owner drilled a hole for drainage which, if you read up on these, is a good idea. It uses a small, commonly available rubber plug used in boats. Overall size, excluding the input and output ports, is approximately 21x15x11 inches.
I really don't want to ship this, so I thought I'd try the local forum first (I hope it's not inappropriate). It's currently up in Brainerd area (where my darkroom is) but I'll be back in Mpls in about a week.
Let me know if interested and we can work something out.
Pics here: http://tinyurl.com/mt3r52z Note: those are reflections, not marks on the plexiglass.
It includes all the dividers and the top piece (used to keep paper from floating up). No cracks or leaks. Prior owner drilled a hole for drainage which, if you read up on these, is a good idea. It uses a small, commonly available rubber plug used in boats. Overall size, excluding the input and output ports, is approximately 21x15x11 inches.
I really don't want to ship this, so I thought I'd try the local forum first (I hope it's not inappropriate). It's currently up in Brainerd area (where my darkroom is) but I'll be back in Mpls in about a week.
Let me know if interested and we can work something out.
