XP2: what filtration are you printing it with?

Wanting to compare notes, and refine my process,...I was wondering what other folks tend to end up dialing in for filtration when printing XP2 Super. I use Agfa, and Ilford FB papers, and find that on an LPL, I often use 40 - 100 units of Magenta, but no yellow. I love the film for scenes where there's enough contrast, becaue it holds the highlights so well, but haven't been so thrilled by the results with low contrast lighting.

nb. I usually rate it at e.i 200

XP2 is great for scenes with high contrast but too soft for low-contrast scenes. I usually print it at grade 4. Nevertheless, if you develop the film yourself, you can modify exposure and development time (ala Zone System) to work the film from N-2.5 to N+1.5.

It has been awhile since I've used it but I would start printing with a grade 3.5 Ilford Multigrade filter on Ilford or Agfa VC papers.

I found I had the best results at EI 125.

Depending on the shot, I've gotten good prints with a #2 filter, though 2 1/2 is more common. In my gallery, the image of the boots and the chair is with a #2 1/2 on Ilford MGFB. I've found that XP-2 is closer to regular B&W than Kodak's C41 B&W.