Want to Buy WTB: Voigtlander 9x12 Plate Holders with the Film Insert.

[Renato Tonelli]

WTB: Voigtlander 9x12 Plate Holders with the Film Insert.

I know that these were made by several manufacturers; The manufacturer of the holder is not important to me; what is important is that they fit the Voigtlander Berheil 9x12.

Condition: they should be intact, so as to slide in the camera without brute force
If they are a little rusty, it's OK - I fill refinish them.

 

🛡️ Classifieds Safety Reminder: Please stay safe when buying and selling. Scams via hacked accounts are on the rise globally.

Best Practices: Always use a verified payment method with buyer protection (avoid "PayPal Friends & Family"). Services like Escrow.com are highly secure. Be suspicious of random unsolicited contact via Private Message. If you see suspicious behavior, please use the Report link on the post immediately.

[Renato Tonelli]

Still looking for Voigtlander, ICA Zeiss 9x12 Film Holders.

Someone mentioned that the ones Kodak made for the European market might also fit the Voigtlander...

 

[ntenny]

Someone mentioned that the ones Kodak made for the European market might also fit the Voigtlander...

I can confirm this from experience—I have a handful of the Kodak holders (the combination film/plate holders, with a sprung back rather than a film sheath) that I use regularly with a 9x12 Bergheil. They’re very convenient, much easier to load and unload than the normal plate holders.

My experience has been that the easiest way to find plate holders is to buy cameras that come with them. You end up with a bunch of cameras, of course, and when you already have a Bergheil, most of the others probably won’t measure up enough to get used…

-NT

 

[Renato Tonelli]

Thank you for confirming the compatibility of the Kodak film holders Nathan.
You’re probably right about the acquisition process .

 

[Alex Varas]

I can confirm this from experience—I have a handful of the Kodak holders (the combination film/plate holders, with a sprung back rather than a film sheath) that I use regularly with a 9x12 Bergheil. They’re very convenient, much easier to load and unload than the normal plate holders.

My experience has been that the easiest way to find plate holders is to buy cameras that come with them. You end up with a bunch of cameras, of course, and when you already have a Bergheil, most of the others probably won’t measure up enough to get used…

-NT

Confirmed as well, I had some, sold all.
Very nice holders.
Renato, if you want I cam dig in local market for Leningrad holders, they fit the Bergueil, I tried them and they are fine.

 

[Renato Tonelli]

Confirmed as well, I had some, sold all.
Very nice holders.
Renato, if you want I cam dig in local market for Leningrad holders, they fit the Bergueil, I tried them and they are fine.

That would be great, if it would not be too much trouble for you.

Thank you.