Want to Buy WTB: Stouffer Step Wedge

[ParkerSmithPhoto]

Looking for a Stouffer Step Wedge to test some film. Let me know, people!

 

[cliveh]

Does it have anything to do will Harry Hill's cat?

https://www.youtube.com/watch?v=f8EMsfGLEsc

 

[mckay3d]

Looking for a Stouffer Step Wedge to test some film. Let me know, people!

I saw one for 14.95 on eBay... I think they sold for more that that...
http://www.ebay.com/itm/Stouffer-Tr...158?pt=LH_DefaultDomain_0&hash=item2a4a31f7f6

Maurice

 

[cowanw]

for the record
http://www.stouffer.net/Photo.htm

 

[seitzcol]

I picked one up directly from them a few months back. It may be a little more than one on ebay, but assuming you need t for doing your testing, it may be worth the extra $ to get one from them that you know is accurate and not damaged, etc., after all, you will most likely make you decisions on development and exposure off of this. I believe you can also ask them to proof the wedge before sending to be sure the values in the wedge are accurate to the density measurements listed. The person I spoke with there was very nice and I received it a few days later.

Hope this helps,

Colin

 

[walbergb]

+1 for Stouffer.net. I have 3 of their step wedges: 21, 31, and a 31 4x5. Use them mostly for experimenting with different toners & papers.

 

[Jim Jones]

The uncalibrated 21 step wedge in the Stouffer catalog is much cheaper than the uncalibrated 21 step Kodak wedge I bought many years ago in a camera store. At least the Kodak wedge was accurate except for one or two steps. Calibration might be necessary for some lab work, but not for most photographers.

 

[jeffreyg]

They are available from Bostick and Sullivan.

http://www.jeffreyglasser.com/

 

[Denverdad]

Do you care what size/type, number of steps, calibrated or uncalibrated? There is some variety in these.
The uncalibrated 21 step "strip" type (#T2115) is actually quite affordable directly from Stouffer at the link provided above - only $7. Then again, I see there is a $20 minimum order now.

 

[RowanBloemhof]

Yup. Also bought one at B&S. The uncalibrated one is only $11. Including shipping to europe i think i paid some 16 or so dollars. Not that bad at all!
Ofcourse they also got em calibrated and in 4x5. But for me this size was just fine.

 

[RalphLambrecht]

Stouffer is still in business and sells these for little money .I'd get a new one if I were you.check stouffer.com

 

[Sirius Glass]

Take a look at http://www.stouffer.net/TransPage.htm#transmission step