Want to Buy WTB: Kodak Series VIII adapter ring 2 1/2" - 63.5mm

Nodda Duma · Oct 6, 2019

looking for a Kodak Series VIII slip on filter adapter ring. 2 1/2” or 63.5mm

Thanks,
Jason

Terrence Brennan · Oct 6, 2019

I don't have one, but when I needed a Series VI slip on ring, to fit a Series VI filter on to my Chrome front Mamiya-Sekor 105mm lens (the old one), I found plenty on eBay. AFAIR, it was less than $15.00, delivered, from Japan.

Nodda Duma · Oct 9, 2019

Series VI is incredibly common. The 2 1/2” Series VIII adapter... not so much.

Totally different diameters.

BrianShaw · Oct 9, 2019

Correct, not as common! There are 3 on eBay right now at about 25-28$. I think one might be your size.

Search “series viii adapter “. I’d include links for you but couldn’t.

Nodda Duma · Oct 9, 2019

Don’t worry I’ve been all over eBay. There used to be 4 examples listed, but I bought the 4th one. They are 2 3/8” series VIII and don’t fit my 12” Commercial Ektar which requires 2 1/2” series VIII (you can dig into period catalogs too like I did).

Thanks, Kodak.

MattKing · Oct 9, 2019

Nodda Duma said:
Don’t worry I’ve been all over eBay. There used to be 4 examples listed, but I bought the 4th one. They are 2 3/8” series VIII and don’t fit my 12” Commercial Ektar which requires 2 1/2” series VIII (you can dig into period catalogs too like I did).

Thanks, Kodak.

Probably a consequence of having production in more than one part of the world, and more than one photographic market.

Keith Pitman · Oct 10, 2019

You might try Glenview. I got another Kodak adapter from him a few years ago. Grimes will make you one, of course, and it will be beautiful.

Keith Pitman · Oct 17, 2019

Also, when searching Ebay, you might search Series VIII lens hoods. Some come with a mounting ring, perhaps of the right size.

Gaston 012 · Oct 19, 2019

HI:
I have two 12 inch Ektars and have never been able to find one. I had one made, jury rigged, with the help of my local machine shop and it works well.
I am away from home and can not remember exactly how we did it (Alzheimer's?) but they charged $100 and, in y opinion, it was well worth it.
If you are interested let me know and I will send you photos and explanations when I return home in early Nov so that you can get yours made locally where you are.

eli griggs · Dec 24, 2019

I found mine on ebay, but it took awhile.

That was several years ago, and, IIRC, was in a small group of Series adapters.

Try setting up a "Google Alert" , as these rings do come up from time to time, and you may have some luck.

gorbas · Dec 24, 2019

For unusual filters and adapters always try: https://filterfind.net/Index.html
Great service! Happy customer!

John Koehrer · Dec 25, 2019

Looking at the link, they have a 66mm-Series Vlll. 2.5mm larger than what you want. I have some foam both 2mm and 3mm
if you want to try that on the inside of the 66. That would give you at least a temporary solution.

The 2mm has an adhesive back & the 3mm doesn't so contact cement is your friend.

Start a conversation if you would like a couple of strips & I'll throw them in envelope & get them to you.

Nodda Duma · Dec 26, 2019

Thanks, John. Let me run down an ebay ad that holds promise first.

Gaston 012 · Dec 26, 2019

Sorry for the delay. Here is the made to order adapter after waiting over a year for one original to come to market.
I do not remember

the cost but it was bellow$90. Price will depend on your location and machinist financials at time of order.
I could have easily been 1/2 inch shorter but the guy wanted to make sure if would not come off aiming down. It is quite snug and there is no way in hell it would fall even if it had been 50% shorter.
Gaston

eli griggs · Dec 26, 2019

Will you be blacking the inner shine?

Gaston 012 · Dec 26, 2019

There is no need to blacken, I think I did not do a good job with the photos.
The holder goes over the outside of the front element and goes all the way to the front rim so no part of it is exposed to light on its inner surface.

eli griggs · Dec 26, 2019

I should have noted that, but I am only on the first part of the first coffee today, so thank you for pointing that out.

Cheers!

John Koehrer · Dec 26, 2019

It looks like a really well made accessory.
That would be an excellent piece for someone to 3D print since they're a bit like chicken lip sandwiches.

Nodda Duma · Jan 24, 2020

All set now!

Gaston 012 · Jan 24, 2020

Very happy for you, if you find another one let me know, I need one more.
Thanks to all

Keith Pitman · Jan 24, 2020

Nodda Duma said:
All set now!

View attachment 238775

Looks very clean!

eli griggs · Jan 24, 2020

Nice hood; which focal lengths does it handle, other than the 300mm/12"?

It looks a little snug and long from my pc.

Nodda Duma · Jan 25, 2020

Far as I know it was made specifically for this lens. I could be wrong, but since that’s the only lens I own that the adapter (and hence the hood) fits on...then it’s the only one that counts.

mshchem · Jan 25, 2020

Nodda Duma said:
Far as I know it was made specifically for this lens. I could be wrong, but since that’s the only lens I own that the adapter (and hence the hood) fits on...then it’s the only one that counts.

Congratulations I went through the same thing, same lens, took me at least 6 months to find one. I didn't get a neat original box though .

Want to Buy WTB: Kodak Series VIII adapter ring 2 1/2" - 63.5mm

Moderator

Privacy & Transparency

Privacy & Transparency